2385 - CNC Machining Centres, Lathes, Grinders and Associated Equipment formerly used in the Aerospace Industry & Others

Daewoo DMH 400 Horizontal Machining Centre with Fanuc 16M Control, Twin 400mm x 400mm Pallets (1° indexing), 60-Station ATC, CAT40 Tooling, Swarf Conveyor, Table and Spindle Probe. S/No. AH4 P00 11 (1998)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser

Heller MCP-H300 Twin Pallet Horizontal Machining Centre with Unipro CNC 90 Control, 630mm x 800mm Pallet Size, 1 Degree Indexing, DIN 50 Spindle, 52 ATC, Swarf Conveyor, Knoll Coolant System, Coolant Chiller, X = 1000mm, Y = 800mm, Z = 1100mm. S/No. 34-43429 (1998) with Tooling

Please Note: This Item is located in Birmingham - Unfortunately there are no loading facilities for this machine - Dismantling & Loading will be at the cost of the purchaser

Cincinnati Lancer 2000 Vertical Machining Centre with Accramatic A2100 Control, Table Size 2286mm x 765mm, Max Load 3000kg, 40 – 6000 RPM, BT50 Spindle, Twin Swarf Conveyors, Coolant. X = 2032mm, Y = 762mm, Z = 770mm. S/No. 7052 A00 RA 0022 (1998)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

This Lot does not include Any Tooling, Fixtures, or OE Unit that may be shown in the lot photographs

Cincinnati Sabre 1250 Vertical Milling Machine, Table Size 1360mm x 650mm, X Axis = 1250mm, Y Axis = 660mm, Z Axis = 660mm, 21-Station ATC, BT40 Tooling, 8,000 RPM Spindle, GE Fanuc Series 0-M Control S/No. 7037/A02/90/005 with Tooling

Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

DMG DMC 104V Linear CNC Vertical Machining Centre with Siemens 810D Control, Table Size 49.2” x 23.6”, 12,000 RPM Spindle Speeds, Through Spindle Coolant, Chip Conveyor, X Axis Travel 1040mm,  Y Axis Travel 600mm, Z Axis Travel 500mm, 25HP Spindle Motor, BT40 Spindle Taper. Linear Drive in X Axis and Manuals. S/No. 29110001122 (2003)

Please Note: This Item is located in East Sussex

Fanuc Robocut Alpha 1C Type A04B-0310-3001/E5 Wire Eroder with Fanuc Series 16-W Control, Tank Size 1m x 750mm, X = 520, Y = 370, Z = 300 Axis Travel. S/No. P97Y1C751 (1997)

Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Citizen L25 Sliding Head CNC Lathe

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser

Haas TL3 HE CNC Lathe with Haas Control, Quick Change Toolpost with holders, 12'' 3-Jaw Manual Chuck Tailstock, Max Cutting dia 20'' length 60''. S/No. 3084224 (2008)

Please Note: This Item is located in Birmingham and Unfortunately there are no loading facilties for this item. Dismantling & Loading will be at the cost of the purchaser

Nakamura Tome TW10 6 Axis CNC Lathe with Luck-Bei CNC Control, Twin Spindles fitted with 170mm diameter chucks, Twin 12-Station Turrets, Multifeed ML1 Short Magazine Bar Feed, Swarf Conveyor. S/No. W103005 (1996)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser

FARO Prime Measuring Arm, S/N R04-02-13-28568  Certification Date 02/26/2013

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle, Blocking & Securing however will be at the cost of the purchaser