2372A - Phase 3 of High quality range of Tajmac Mori-Say, Gildemeister and Wickman Multi-Spindle Automatic Lathes and Associated Equipment previously used by MRT Spa, Bergamo, Italy
Engineering
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
Location:- These Items are located in Suisio (Bergamo) - Unfortunately there are no loading facilities on site, Dismantling & Loading will be at the cost of the purchaser
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 18.00%.
VAT
Stawka VAT wynosi 22.00 %.
Seitenaufrufe
Viewing is available by appointment only with the Auctioneer,
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on + 39 073 267 7063 or email info@cottandco.it
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmioty 41-50 z 71
Przedmiot 87: Wickman 2 5/8" 6 Bar Multi-Spindle Automatic
Wickman 2 5/8" 6 Bar Multi-Spindle Automatic, Control Panel, (1) Threading Attachment logan position 3, (4) Fixed Toolholder supports, (3) Drill Toolholder Morse Taper, (1) Front Turning Equipment, (4) Modularized Toolholder, (1) Toolholder for cutting with micrometric sizing, (1) Independent Control Position 6. S/No: 14754
Please Note: This Item is located in Suisio (Bergamo)
Przedmiot 88: Wickman 2 5/8" 6 Bar Multi-Spindle Automatic
Wickman 2 5/8" 6 Bar Multi-Spindle Automatic, Control Panel, (1) Threading Attachment Logan Position 3, (4) Modularised Toolholder, (1) Toolholder for cutting with micrometric sizing, (3) Fixed drill toolholder supports, (2) Drill Toolholder Morse Taper, (1) Front Turning Equipment. S/No. 30035
Please Note: This Item is located in Suisio (Bergamo)
Przedmiot 89: Wickman 2 5/8" 6 Bar Multi-Spindle Automatic
Wickman 2 5/8" 6 Bar Multi-Spindle Automatic, Control Panel, (1) Wedge Recessing device by TSE, (1) Threading Attachment Logan (Missing Transmission), (4) Modularized Toolholder, (1) Toolholder for cutting with micrometric sizing, (3) Fixed Drill Toolholder Supports, (2) Drill Toolholder Morse Taper, (1) Front Turning Equipment. S/No. 30024
Please Note: This Item is located in Suisio (Bergamo)
Przedmiot 90: Wickman 3 1/4" 6 Bar Multi-Spindle Automatic
Wickman 3 1/4" 6 Bar Multi-Spindle Automatic, Control Panel, (1) Wedge recessing device by TSE, (5) Fixed Drill Toolholder Supports, (1) Driving Gear-box for speed drilling, (3) Drill Toolholder Morse Taper, (1) Cylindrical Toolholder, (2) Front Turning, (4) Modular Toolholder, (1) Toolholder for cutting with micrometric sizing, (1) Independent control position 6. S/No. 17017
Please Note: This Item is located in Suisio (Bergamo)
Przedmiot 97: Gildemeister Type IMIS TAM 6/20 Automatic Multi-Spindle Lathe
Gildemeister Type IMIS TAM 6/20 Automatic Multi-Spindle Lathe S/No: 141
with Aemme Control Panel
Please Note: This Item is located in Suisio (Bergamo)
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 98: Cucchi Giovanni Type CMSP.625 Bar Loader
Cucchi Giovanni Type CMSP.625 Bar Loader, CE Compliant. S/No. CMSP.62508098 (2008)
Please Note: This Item is located in Suisio (Bergamo)
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 99: Combination of Lots 97 & 98:-
Combination of Lots 97 & 98:-
Gildemeister Type AS16 Automatic Multi-Spindle Lathe S/No: 141 with PM Impianti Control Panel
and
Cucchi Giovanni Type CMSP.625 Bar Loader. S/No: CMSP.62508098 (2008)
Please Note: This Item is located in Suisio (Bergamo)
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
97 | Gildemeister Type IMIS TAM 6/20 Automatic Multi-Spindle Lathe |
98 | Cucchi Giovanni Type CMSP.625 Bar Loader |
Przedmiot 108: Gildemeister Type IMIS TAM 6/20 modified to AS25 Automatic Multi-Spindle Lathe
Gildemeister Type IMIS TAM 6/20 modified to AS25 Automatic Multi-Spindle Lathe. S/No. 094
with PM Impianti Control Panel. S/No. 0047/11 (2000)
and Cucchi Giovanni Type CMSP 28 Bar Loader. S/No. CMSP 99.032 (1999)
Please Note: This Item is located in Suisio (Bergamo)
Przedmiot 110: Gildemeister Type IMIS TAM 6/20 modified to AS25 Automatic Multi-Spindle Lathe
Gildemeister Type IMIS TAM 6/20 modified to AS25 Automatic Multi-Spindle Lathe. S/No. 042
with PM Impianti Control Panel. S/No. 0047/09 (2000)
and Cucchi Giovanni Type CMSP 625 Bar Loader. S/No. CMSP 96.002 (1996)
Please Note: This Item is located in Suisio (Bergamo)
Przedmiot 112: Gildemeister Type IMIS TAM 6/20 modified to AS25 Automatic Multi-Spindle Lathe
Gildemeister Type IMIS TAM 6/20 modified to AS25 Automatic Multi-Spindle Lathe. S/No. 035
with PM Impianti Control Panel. S/No. 0047/04 (2000)
and Cucchi Giovanni Type CMSP.28 Bar Loader. S/No. CMSP - 97006 (1997)
Please Note: This Item is located in Suisio (Bergamo)