3302R - Removed Lots
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Lot 17 & 18 added together to make one lot - removed lot 18
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 22
Lot 1: Hyundai Wia KBN 135C Horizontal Boring & Drilling Machine
Hyundai Wia KBN 135C Horizontal Boring & Drilling Machine with Fanuc Control. S/No. 63215-0084 (2017) with 5 Axis, Table Size 2000 x 1800mm, Spindle Range 3-2000 RPM, Spindle Taper BT50, 40 ATC, Jet Master MSHC 20 P15LT Filtration, Spindle Chiller, Swarf Conveyor, Guarding.
SOLD
PRE-AUCTION OFFER AGREED
Location: This lot is located in East Kilbride, Scotland. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 800: Floor Bolted Overhead Double Bay Gantry Crane System
Floor Bolted Overhead Double Bay Gantry Crane System, to include Demag 5ton & 3ton Pendant, Remote Operated Hoist on Crossbeam 10m Wide and 10t Double Beam Gantry Crane in 2nd Bay Width 9.9m Wide
Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK ...
Lot 1A: Various BT50 Spindle Tool Holders used on Hyundai KBN-135C Horizontal Machining Centre
Various BT50 Spindle Tool Holders used on Hyundai KBN-135C Horizontal Machining Centre
SOLD
PRE-AUCTION OFFER
AGREED
Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. ...
Lot 1B: Lenzkes Work Holding Clamping and Chain Strapping with Vee Blocks
Lenzkes Work Holding Clamping and Chain Strapping with Vee Blocks
SOLD
PRE-AUCTION OFFER
AGREED
Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are ...
Lot 1C: Various BT50 Spindle Boring Heads and Extension Pieces used on Hyundai KBN-135C Horizontal Machining Centre
Various BT50 Spindle Boring Heads and Extension Pieces used on Hyundai KBN-135C Horizontal Machining Centre
SOLD
PRE-AUCTION OFFER
AGREED
Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from ...
Lot 1D: (2) x Steel Fabricated Angle Plates
(2) x Steel Fabricated Angle Plates, Size 765mm x 2000mm High, M20 Thread Holes on 100mm Pitch Centres, Including Bed Spacer Feet
SOLD
PRE-AUCTION OFFER
AGREED
Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK ...
Lot 1E: Cogsdill MBT50-SP-SK50-0, Valve Seat Pocket Spindle Tool used on Hyundai Horizontal Borer
Cogsdill MBT50-SP-SK50-0, Valve Seat Pocket Spindle Tool used on Hyundai Horizontal Borer, Type MBT50 Single Slide Head. S/No. Wo.48457
SOLD
PRE-AUCTION OFFER
AGREED
Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory ...
Lot 1F: Cogsdill ZX300-TC-SK 50-0,ZX300 Facing and Generating Spindle Head
Cogsdill ZX300-TC-SK 50-0,ZX300 Facing and Generating Spindle Head with Spacer Collar. S/No. Wo.52425
SOLD
PRE-AUCTION OFFER
AGREED
Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st ...
Lot 1G: Cogsdill MBT100-SP-SK50-0, MBT100 Single Slide Spindle Head
Cogsdill MBT100-SP-SK50-0, MBT100 Single Slide Spindle Head. S/No. Wo.52411
SOLD
PRE-AUCTION OFFER
AGREED
Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...
Lot *: Combination of lots 1 - 1G
Combination of lots 1 - 1G
Lot 1 - Hyundai Wia KBN 135C Horizontal Boring & Drilling Machine with Fanuc Control. S/No. 63215-0084 (2017) with 5 Axis, Table Size 2000 x 1800mm, Spindle Range 3-2000 RPM, Spindle Taper BT50, 40 ATC, Jet Master MSHC 20 P15LT Filtration, Spindle Chiller, Swarf Conveyor, Guarding.
Lot 1A - Various BT50 Spindle Tool Holders used on Hyundai KBN-135C Horizontal Machining Centre
Lot 1B - Lenzkes Work Holding Clamping and Chain Strapping with Vee Blocks
Lot 1C - Various BT50 Spindle Boring Heads and Extension Pieces used on Hyundai KBN-135C Horizontal Machining Centre
Lot 1D - (2) x Steel Fabricated Angle Plates, Size 765mm x 2000mm High, M20 Thread Holes on 100mm Pitch Centres, Including Bed Spacer ...