3294 - Doosan Puma Alloy Wheel Lathes & Large Selection of Doosan DNM 6700/650II/400 Machining Centres (2013 – 2016)
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Birmingham and Wolverhampton, UK. Please see individual lots for loading information and charges. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 20
Lot 6A: Air-O-Filter AF-20P Oil Mist Filter Extractor
Air-O-Filter AF-20P Oil Mist Filter Extractor
Please Note: This lot is located in Wolverhampton, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 6 & 6A
Combination of lots 6 & 6A
Lot 6 - Doosan DNM 6700 Vertical Machining Centre with Fanuc I Series CNC Control, Table Size 1500mm x 670mm, 30 Tool ATC, 40 Spindle Taper, LNS Swarf Conveyor and Coolant System, Approx. run time 25715 hours, Max Spindle Speed 12,000rpm. S/No. MV 0092-000177 (2016). Country of Origin: Korea
Lot 6A - Air-O-Filter AF-20P Oil Mist Filter Extractor
Please Note: This lot is located in Wolverhampton, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 6 | Doosan DNM 6700 Vertical Machining Centre |
| 6A | Air-O-Filter AF-20P Oil Mist Filter Extractor |
Lot 7: Doosan DNM 6700 Vertical Machining Centre
Doosan DNM 6700 Vertical Machining Centre with Fanuc Series CNC Control, Table Size 1500mm x 670mm, 30 Tool ATC, 40 Spindle Taper, LNS Swarf Conveyor and Coolant System, Approx Run Time 28175 Hours, Max Spindle Speeds 12,000rpm. S/No. MV0092-000176 (2016). Country of Origin: Korea
Please Note: This lot is located in Wolverhampton, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 7A: Air-O-Filter AF-20P Oil Mist Filter Extractor
Air-O-Filter AF-20P Oil Mist Filter Extractor
Please Note: This lot is located in Wolverhampton, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 7 & 7A
Combination of lots 7 & 7A
Lot 7 - Doosan DNM 6700 Vertical Machining Centre with Fanuc Series CNC Control, Table Size 1500mm x 670mm, 30 Tool ATC, 40 Spindle Taper, LNS Swarf Conveyor and Coolant System, Approx Run Time 28175 Hours. S/No. MV0092-000176 (2016). Country of Origin: Korea
Lot 7A - Air-O-Filter AF-20P Oil Mist Filter Extractor
Please Note: This lot is located in Wolverhampton, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 7 | Doosan DNM 6700 Vertical Machining Centre |
| 7A | Air-O-Filter AF-20P Oil Mist Filter Extractor |
Lot 8: Doosan DNM 6700 Vertical Machining Centre
Doosan DNM 6700 Vertical Machining Centre with Fanuc Series 1500mm x 670mm, 30 Tool ATC, 40 Spindle Taper, LNS Swarf Conveyor and Coolant System, Approx. Run Time 28558 hours, Max Spindle Speed 12,000rpm. S/No. MV0092-000135 (2016). Country of Origin: Korea
Please Note: Right hand screw conveyor fault.
Please Note: This lot is located in Wolverhampton, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods ...
Lot 9: Doosan DNM 650 II Vertical Machining Centre
Doosan DNM 650 II Vertical Machining Centre with Fanuc I Series CNC Control, Table Size 1300mm x 670mm, 30 Tool ATC, 40 Spindle Taper, LNS Swarf Conveyor and Coolant System, Approx. Run Time 28755 Hours. Max Spindle Speeds 12,000rpm. S/No. MV0011-001604 (2014). Country of Origin: Korea
Please Note: Left hand screw conveyor fault.
Please Note: This lot is located in Wolverhampton, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 9A: Air-O-Filter AF-20P Oil Mist Filter Extractor
Air-O-Filter AF-20P Oil Mist Filter Extractor
Please Note: This lot is located in Wolverhampton, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 9 & 9A
Combination of lots 9 & 9A
Lot 9 - Doosan DNM 650 II Vertical Machining Centre with Fanuc I Series CNC Control, Table Size 1300mm x 670mm, 30 Tool ATC, 40 Spindle Taper, LNS Swarf Conveyor and Coolant System, Approx. Run Time 28755 Hours. Max Spindle Speeds 12,000rpm. S/No. MV0011-001604 (2014). Country of Origin: Korea
Lot 9A - Air-O-Filter AF-20P Oil Mist Filter Extractor
Please Note: This lot is located in Wolverhampton, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 9 | Doosan DNM 650 II Vertical Machining Centre |
| 9A | Air-O-Filter AF-20P Oil Mist Filter Extractor |
Lot 10: Doosan DNM 400 Vertical Machining Centre
Doosan DNM 400 Vertical Machining Centre with Fanuc I Series CNC Control, Table Size 920mm x 435mm, 30 Tool ATC, 40 Spindle Taper, Renishaw Probe, LNS Swarf Conveyor and Coolant System, Approx. Run Time 1882 Hours, Max Spindle Speed 12,000rpm. S/No. MV0009-001864 (2013). Country of Origin: Korea
Please Note: This lot is located in Wolverhampton, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the ...