2590 - High Quality CNC Machining Centres & Lathes plus other Toolroom Equipment previously used by Jordan Engineering Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Please click here to view a Brochure for this Auction
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer on Monday 5th June 2017 from 1pm (UK Time)
Please contact our Office on: +44 (0) 121 328 2424 or email
us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 120
Lot *: Combination of Lots 3 & 3A
Combination of Lots 3 & 3A
Lot 3 - Doosan DNM 650 Vertical Machining Centre with Fanuc Series i Control, Table Size: 1,300mm x 670mm, X = 1,250mm, Y = 650mm, Z = 610mm, Spindle Speeds: 8,000rpm, 40INT Spindle Taper, 30-Position Toolchanger, Chiller & Swarf Conveyor. S/No. DNM6500100 (10/2009)
Lot 3A - 4th Axis Unit, 320mm 3-Jaw Chuck
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
3 | Doosan DNM 650 Vertical Machine Centre |
3A | 4th Axis Unit with 320mm 3-Jaw Chuck |
Lot 3B: Qty BT 40 Tooling
Qty BT 40 Tooling
Please Note: This lot is located in Gateshead, Newcastle Upon
Tyne. Unfortunately there are no loading facilities available on
site. Dismantling & Loading will be at the cost of the
purchaser.
Lot 3C: Qty BT 40 Tooling
Qty BT 40 Tooling
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 4: Doosan DNM 650 Vertical Machine Centre
Doosan DNM 650 Vertical Machining Centre with Fanuc Series i Control, Table Size; 1,300mm x 670mm, X = 1,250mm, Y = 650mm, Z = 610mm, Spindle Speeds: 8,000rpm, 40INT Spindle Taper, 30-Position Toolchanger, 320mm 3-Jaw Chuck, Chiller & Swarf Conveyor. S/No. MV0011-000934 (10/2012)
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 4A: Qty BT40 Tooling
Qty BT40 Tooling
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 4B: Qty BT40 Tooling
Qty BT40 Tooling
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 4C: Qty BT40 Tooling
Qty BT 40 Tooling
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 4D: BT 40 Boring Head Dinox KMB6336 5 – 15mm
BT 40 Boring Head Dinox KMB6336 5 – 15mm
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 4E: Cupboard with Large Qty of Collets
Cupboard with Large Qty of Collets
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 5: Mazak E – Tower 5 Axis Multitasking Turning / Milling Machine
Mazak E – Tower 5-Axis Multitasking Turning/Milling Machine with Matrix Control, Twin Vertical Chucks: 600mm diameter, X = 1,100mm, Y = 800mm, Z = 900mm, B-Axis: 150 Degrees, C-Axis: 360 Degrees, Speeds: 12,000rpm, 80-Position Toolchanger, Jet Coolant, (1) 600mm 4-Jaw Chuck & Chiller. S/No. 190766 (02/2007)
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.