2561 - Gravure Cylinder Manufacturing Process to include Hell Gravure Systems HelioKlischograph Engravers, MDC-Max Datwyler Finishing Machines and K Walter Polishers previously used by Roto Alba Srl, Italy
Printing
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These Items are located in Alba, Piedmont, Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our Italian Office on + 39 0732 677 063 or email info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 55
Lot 11: MDC-Max Dätwyler AG CU Master Copper Electroplating Tank
MDC-Max Dätwyler AG CU Master Type V5 Copper Electroplating Tank (1986) with Control, Maximum Cylinder length 2800mm
Please Note: This Item is located in Piedmont, Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 12: MDC-Max Dätwyler AG Copperstar P2715 Electroplating Tank
MDC-Max Dätwyler AG Copperstar P2715 Electroplating Tank. S/No. 212 (2003) with Control, Maximum Cylinder length 2800mm
Please Note: This Item is located in Piedmont, Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 13: MDC-Max Dätwyler AG Combimaster Washing & Degreasing Tank
MDC-Max Dätwyler AG Combimaster Washing & Degreasing Tank. S/No. 18 (1985) with Control, Maximum Cylinder length 2500mm
Please Note: This Item is located in Piedmont, Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 14: MDC-Max Dätwyler AG Dechromaster Cylinder Stripping Machine
MDC-Max Dätwyler AG Dechromaster Cylinder Stripping Machine (1986) with Control, Maximum Cylinder length 2500mm
Please Note: This Item is located in Piedmont, Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 15: K Walter CCG Cylinder Stripping Machine
K Walter CCG Cylinder Stripping Machine, Maximum Cylinder length 2500mm
Please Note: This Item is located in Piedmont, Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 16: MDC-Max Dätwyler AG Polishmaster BL2600 Cylinder Milling Machine
MDC-Max Dätwyler AG Polishmaster BL2600 Cylinder Milling
Machine. S/No. 0132 (1991), Maximum Cylinder length 2700mm
Please Note: This Item is located in Piedmont, Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 16A: Swarf Collection Unit
Swarf Collection Unit with Integral Briquette Baler and Shear
Please Note: This Item is located in Piedmont, Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 16B: Cabinet with Spare Milling Heads
Cabinet with Spare Milling Heads
Please Note: This Item is located in Piedmont, Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of Lots 16, 16A & 16B
Combination of Lots 16, 16A & 16B
Lot 16 - MDC-Max Dätwyler AG Polishmaster BL2600 Cylinder Milling Machine. S/No. 0132 (1991), Maximum Cylinder length 2700mm
and
Lot 16A - Swarf Collection Unit with Integral Briquette Baler and Shear
and
Lot 16B - Cabinet with Spare Milling Heads
Please Note: These Items are located in Piedmont, Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 16 | MDC-Max Dätwyler AG Polishmaster BL2600 Cylinder Milling Machine |
| 16A | Swarf Collection Unit |
| 16B | Cabinet with Spare Milling Heads |
Lot 17: Demag 1.5-Ton Crane
Demag 1.5-Ton Crane. S/No 524331/h82 with Cylinder Lifting Beam
Please Note: This Item is located in Piedmont, Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.