2538 - CNC Vertical & Horizontal Machining Centres, Large Capacity CNC Lathes, Conventional Vertical & Horizontal Borers & Turret Lathes previously used by a National Oil & Gas Company
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These Items are located in Broxburn, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
However Lot 3A is located in Birmingham, West Midlands and will be loaded free of charge to a suitable vehicle. Blocking & Securing however will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer on Thursday 16th March 2017.
Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 144
Lot 1: Mazak VTC-800/30 Vertical Machining Centre
Mazak VTC-800/30 Vertical Machining Centre with Mazatrol Matrix Control, 5-Axis, 48-Station Toolchanger, Tool Sensor, CAT 40 Tooling, Table Size:3.5m x 820mm, Swarf Conveyor. S/No. 215475 (2010)
Please Note: This Lot is located in Broxburn, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 2: Mazak VTC-820/20 Vertical Machining Centre
Mazak VTC-820/20 Vertical Machining Centre with Mazatrol Matrix Nexus Control, 48-Station Toolchanger, Tool Sensor, CAT40 Tooling, Table Size: 2.5m x 820mm, Swarf Conveyor. S/No. 515567 (2010)
Please Note: This Lot is located in Broxburn, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 3: Mazak VTC-300C II Vertical Machining Centre
Mazak VTC-300C II Vertical Machining Centre with Mazatrol 640M Control, Tool Sensor, 48-Station Toolchanger, CAT40 Tooling, Table Size: 2m x 760mm, Swarf Conveyor. S/No. 213909 (2010)
Please Note: This Lot is located in Broxburn, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 3A: Yamazaki Mazak Slant Turn 50 CNC Lathe
Yamazaki Mazak Slant Turn 50 CNC Lathe with Mazatrol PC-Fusion-CNC 640T Control, Standard Cutting diameter: 560mm, Max. Swing: 805mm, Spindle Speed: 1,600rpm, 104mm Spindle Bore, 15-Station Turret, Tailstock, Coolant System (2006)
Please Note: This Item is located in Birmingham, West Midlands and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.
Lot 4: Mazak FH-6800 Horizontal Machining Centre
Mazak FH-6800 Horizontal Machining Centre with Mazatrol 640M Control, Pallet Size: 630mm, CAT50 Tooling, 80-Station Toolchanger, Twin Swarf Conveyor & Renishaw Probe. S/No. 211915 (10/2008)
Please Note: This Lot is located in Broxburn, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 4A: 630mm Fixtures
630mm Fixtures
Please Note: This Lot is located in Broxburn, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 4B: 630mm Fixtures
630mm Fixtures
Please Note: This Lot is located in Broxburn, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of Lots 4, 4A & 4B
Combination of Lots 4, 4A & 4B
Lot 4 - Mazak FH-6800 Machining Centre with Mazatrol 640M Control, Pallet Size: 630mm, CAT50 Tooling, 80-Station Toolchanger, Twin Swarf Conveyor & Renishaw Probe. S/No. 211915 (10/2008)
Lot 4A - 630mm Fixtures
Lot 4B - 630mm Fixtures
Please Note: This Lot is located in Broxburn, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 4 | Mazak FH-6800 Horizontal Machining Centre |
| 4A | 630mm Fixtures |
| 4B | 630mm Fixtures |
Lot 5: Hyundai WIA KH63G Twin Pallet Horizontal Machining Centre
Hyundai WIA KH63G Twin Pallet Horizontal Machining Centre with Fanuc Series 31i Model A Control, 60-Station Toolchanger, Pallet Size: 630mm, BT50 Tooling, Swarf Conveyor. S/No. G3641-1278 (01/2012)
Please Note: This Lot is located in Broxburn, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 5A: (2) 630mm Fixtures
(2) 630mm Fixtures
Please Note: This Lot is located in Broxburn, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.