2463 - CNC Grinders and Turning Equipment used in the Production of Crankshafts no longer required by M&S Crankshafts Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Items are located in Lincoln & Manchester.
Lots located at Manchester, unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lots 106, 112 and 114 located at Lincoln will be dismantled by our maintenance and loaded on to purchasers transport.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on + 39 0732 677 063 or email info@cottandco.it
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 34
Lot 100: Chiron FZ 18 KL Vertical Machining Centre
Chiron FZ 18 KL Vertical Machining Centre with Siemens 167-15 Control, Table size 3.2m x 570mm, Renishaw Active Probe with Swarf Conveyor, 40-Station Tool Changer, Cat 40 Tooling, 16” 4 Jaw Chuck, S/No 6086 (2003) with 4th Axis, Unit S/No. 6086 (2011)
Please Note: This lot is located in Manchester, Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 101: Correa CF-22/25 Milling Machine
Correa CF-22/25 Milling Machine with Heidenhain TNC 426 Control, Table Size 2.5m x 700mm, S/No. 9672107 (1999)
Please Note: This lot is located in Manchester, Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 102: Herbert Devlieg Type 3H 48 Spiramatic Jigmill
Herbert Devlieg Type 3H 48 Spiramatic Jigmill with Newhall Dro, Table Size 1.2m x 900mm Approx. S/No. 63
Please Note: This lot is located in Manchester, Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 103: Schou Pin Grinder
Schou Pin Grinder with 1m Grinding Wheel, Newhall Dro, Distance between Centres 3m, (2) 12’’ Chucks.
Please Note: This lot is located in Manchester, Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 104: Matra Pin Grinder
Matra Pin Grinder with 3ft Grinding Wheel and Wheel Dressers,
Newhall Dro, Distance between centres 3.1m, Plate size 500mm
Please Note: This lot is located in Manchester, Unfortunately
there are no loading facilities available on site. Dismantling
& Loading will be at the cost of the purchaser.
Lot 105: Churchill Grinder
Churchill Grinder, 9” Swing, Distance between centres 29”
Please Note: This lot is located in Manchester, Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 106: Schmaltz RGK 1250 Journal & Pin Grinder
Schmaltz RGK 1250 Journal & Pin Grinder, Swing Over Bed 1250 mm x 4000mm BC, Max Crankshaft offsett 250mm, Steadies, Spare Wheel, Coolant Tank, Max Pin/Journal 330mm Diameter, S/No. 47600 (1965)
Please Note: This lot is located in Lincoln and will be
dismantled by our maintenance and loaded on to purchasers
transport.
Lot 107: Scledum RG-350 Pin Grinder
Scledum RG-350 Pin Grinder with Newhall DP700 DRO, 2 Steadies, Distance between centres 3.1m, Height of centre 350mm, 10” 3 Jaw Chuck, 12” 3 Jaw Chuck, S/No. 152
Please Note: This lot is located in Manchester, Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 108: Dean Smith & Grace Type 30 CNC Lathe
Dean Smith & Grace Type 30 CNC Lathe with Grundig Manual Plus CNC Control, Swarf Conveyor, 27” 4 Jaw Chuck, 30” 4 Jaw Chuck, 3 Jaw Steady with Tooling, Distance between Centres 70”, S/No. 41300-6-79
Please Note: This lot is located in Manchester, Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 109: Dean Smith & Grace Type 21 Gap Bed Lathe
Dean Smith & Grace Type 21 Gap Bed Lathe with Newhall B60 DRO, 22” 4 Jaw Chuck, 3 Point Steady, Distance between Centres 96”. S/No. 31169 12-56
Please Note: This lot is located in Manchester, Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.