2427 - Fabrication & Conventional Machine Tools surplus to the requirements of the Engineering Industry, Ex. College Equipment & Others
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Items are located in Chesterfield, Lancashire, Redditch and Merseyside, Please see individual lots for loading information
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 57
Lot 9: Fomp (Off Mecc Ferro G&C, Limena, Italy) 2500 mm X 18 mm, Three Roll Double Initial Pinch Plate Bending Rolls
Fomp (Off Mecc Ferro G&C, Limena, Italy) 2500 mm X 18 mm,
Three Roll Double Initial Pinch Plate Bending Rolls, Rolling
Capacity 23 mm. Roll Diameter 375 mm. Mechanical Drive, Hydraulic
Adjustment To Top Roll, Bottom Rolls, Hydraulic Drop End. Push
Button And Hand Lever Controls, Cone Bending Guide, Emergency Trip
Wires, Approx. Dimensions 6m X 2m X 2.15m High. S/No. 138
Please Note: This Item is located in Haslingden, Lancashire
and will be loaded to a suitable vehicle free of charge however
blocking and securing will be at the cost of the purchaser.
Lot 10: Unused Demo Use Only, Ep Asy 1050 Mm X 4 Mm Asymmetric, Initial Pinch Plate Bending Rolls
Unused Demo Use Only, Ep Asy 1050 Mm X 4 Mm Asymmetric, Initial
Pinch Plate Bending Rolls. Roll Diameter 130 Mm. Power Adjustment
To Back Bending Roll, Digital Readout For Position Of Back Roll.
Manual Adj to Pinch Roll, Top Roll To Slip. Induction Hardened
Rolls, Cone Rolling Attachment, Brake Motor, Trip Wires, 3kw Drive.
Please Note: This Item Is Located In Chesterfield, Derbyshire
and will be loaded to a suitable vehicle free of charge however
blocking and securing will be at the cost of the purchaser
Lot 11: Heisteel Fix-L 2000 mm x 4 mm Pyramid Plate Bending Rolls
Heisteel Fix-L 2000 mm x 4 mm Pyramid Plate Bending Rolls, 125
mm Diameter Rolls, Kick Stops, Drop End.
Please Note: This Item is located in Chesterfield, Derbyshire
and will be loaded to a suitable vehicle free of charge however
blocking and securing will be at the cost of the purchaser.
Lot 12: Hilmor Md3b, 76 Mm Od x 3 mm Tube Capacity Mandrel Tube Bending Machine
Hilmor Md3b, 76 Mm Od x 3 mm Tube Capacity Mandrel Tube Bending
Machine, Hydraulic Mandrel Retraction, Large Amount of Tooling (See
Attached List). S/No. 760416173
Please Note: This Item is located in Chesterfield, Derbyshire
and will be loaded to a suitable vehicle free of charge however
blocking and securing will be at the cost of the purchaser
Lot 14: Pedrazzoli Cod Mouth Tube Milling Machine
Pedrazzoli Cod Mouth Tube Milling Machine, Universal Vice.
Please Note: This Item is located in Chesterfield, Derbyshire
and will be loaded to a suitable vehicle free of charge however
blocking and securing will be at the cost of the purchaser
Lot 15: Huttenlocher & Schafer Model HSK/N 2530mm x 2.25mm Capacity Mechanical Guillotine Shear
Huttenlocher & Schafer Model HSK/N 2530mm x 2.25mm Capacity
Mechanical Guillotine Shear. Including 2 x Front Supports & 1 x
Extended Squaring Arm. S/No 3129 (1998)
Please Note: This Item Is Located In Chesterfield, Derbyshire
and will be loaded to a suitable vehicle free of charge however
blocking and securing will be at the cost of the purchaser
Lot 16: Morgan 2500 x 3.2 mm Mechanical Guillotine Shear
Morgan 2500 x 3.2 mm Mechanical Guillotine Shear, Front
Supports, Squaring Arm, Foot Pedal Control without Back Gauge
Please Note: This Item is located in Merseyside and will be
loaded to a suitable vehicle free of charge however blocking and
securing will be at the cost of the purchaser
Lot 17: Compare Cyclon 218 – 7.5Bar Air Compressor
Compare Cyclon 218 – 7.5Bar Air Compressor including Dryer &
Cooler (2000)
Please Note: This Item is located in Redditch and will be
loaded to a suitable vehicle free of charge however blocking and
securing will be at the cost of the purchaser
Lot 18: Murex Transtig Ac/Dc 360. 350 Amp Square Wave Tig Welder
Murex Transtig Ac/Dc 360. 350 Amp Square Wave Tig Welder, With
Cooler, Foot Pedal, Torch.
Please Note: This Item Is Located In Chesterfield, Derbyshire
and will be loaded to a suitable vehicle free of charge however
blocking and securing will be at the cost of the purchaser
Lot 19: Camarc Compact 200, 200 Amp Mig Welder
Camarc Compact 200, 200 Amp Mig Welder with Torch
Please Note: This Item Is Located In Chesterfield, Derbyshire
and will be loaded to a suitable vehicle free of charge however
blocking and securing will be at the cost of the purchaser