2423 – CNC Lathes and Vertical Machining Centres due to Investment and Restructuring at Hymec Aerospace (UK) Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Items are located in Plymouth and Newton Abbot, Unfortunately there are no loading facilities at this site. Dismantling and Loading will be at the cost of the purchaser
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer Please contact our Office on: +44 (0) 121 328 2424
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-18 de 18
Lot 10A: Tongtai QVM-1100 Vertical Machining Centre with Fanuc Series Oi-MD Control
Tongtai QVM-1100 Vertical Machining Centre with Fanuc Series
Oi-MD Control, 1200mm x 600mm Table, X Axis = 1100mm,
Y Axis = 600mm, Z Axis = 510mm, 24-Station ATC, Swarf System.
S/No. 32994 (2014)
Please Note: This Item is located in Plymouth, Unfortunately there are no loading facilities at this site. Dismantling and Loading will be at the cost of the purchaser.
Lot 11: Matchmaker Type VMC-1100 Vertical Machining Centre
Matchmaker Type VMC-1100 Vertical Machining Centre with Fanuc
Series Oi-MC Control, 20-Station ATC, BT40 Tooling, X Axis Travel =
1100mm, Y = 550mm, Z = 600mm, 8000 RPM, Swarf Screw, Table Size
630mm x 1300mm. S/No. V11008068 (2008)
Please Note: This Item excludes Tooling
Please Note: This Item is located in Newton Abbot,
Unfortunately there are no loading facilities at this site.
Dismantling and Loading will be at the cost of the
purchaser.
Lot 12: Matchmaker Type VMC-1100 Vertical Machining Centre
Matchmaker Type VMC-1100 Vertical Machining Centre with Fanuc
Series Oi-MC Control, 20-Station ATC, BT 40 Tooling, X Axis Travel
= 1100mm, Y Axis = 550mm, Z = 600mm, 8,000 RPM, Swarf Screw, Table
Size 630mm x 1300mm. S/No. V11008072 (2008)
Please Note: This Item excludes Tooling
Please Note: This Item is located in Newton Abbot,
Unfortunately there are no loading facilities at this site.
Dismantling and Loading will be at the cost of the
purchaser
Lot 13: Matchmaker Type VMC-820 Vertical Machining Centre
Matchmaker Type VMC-820 Vertical Machining Centre with Fanuc
Series Oi-MC Control, X = 820mm, Y = 520mm, Z = 510mm, 8000 RPM,
BT40 Tooling, 20-Station ATC, Swarf Screw, Table Size 450mm x
950mm. S/No. V82006317 (2006)
Please Note: This Item excludes Tooling
Please Note: This Item is located in Newton Abbot,
Unfortunately there are no loading facilities at this site.
Dismantling and Loading will be at the cost of the purchaser
Lot 14: Matchmaker Type VMC-820 Vertical Machining Centre
Matchmaker Type VMC-820 Vertical Machining Centre with Fanuc
Series Oi-MC Control, X = 820mm, Y = 520mm, Z = 510mm, 8,000 RPM
Spindle, BT40 Tooling, 20-Station ATC, Swarf Screw, Table Size
450mm x 950mm. S/No. V82006320 (2006)
Please Note: This Item excludes Tooling
Please Note: This Item is located in Newton Abbot,
Unfortunately there are no loading facilities at this site.
Dismantling and Loading will be at the cost of the
purchaser
Lot 15: Matchmaker Type VMC-820 Vertical Machining Centre
Matchmaker Type VMC-820 Vertical Machining Centre with Fanuc
Series Oi-MC Control, X Axis = 820mm, Y Axis = 520mm, Z = 510mm,
8,000 RPM, BT40 Tooling, Swarf Screw, Table Size 450mm x 950mm.
S/No. V82006318 (2006)
Please Note: This Item excludes Tooling
Please Note: This Item is located in Newton Abbot,
Unfortunately there are no loading facilities at this site.
Dismantling and Loading will be at the cost of the
purchaser.
Lot 16: Matchmaker Type VMC-820 Vertical Machining Centre
Matchmaker Type VMC-820 Vertical Machining Centre with Fanuc
Series Oi-MC Control, X Axis = 820mm, Y = 520mm, Z = 510mm, 8000
RPM, BT40 Tooling, 20-Station ATC, Swarf Screw, Table Size 450mm x
950mm. S/No. V82006322 (2006)
Please Note: This Item excludes Tooling
Please Note: This Item is located in Newton Abbot,
Unfortunately there are no loading facilities at this site.
Dismantling and Loading will be at the cost of the
purchaser
Lot 17: Matchmaker Type VMC-820 Vertical Machining Centre
Matchmaker Type VMC-820 Vertical Machining Centre with Fanuc
Series Oi-MC Control, X Axis = 820mm, Y Axis = 520mm, Z Axis =
510mm, 8000 RPM, BT40 Tooling, 20-Station ATC, Swarf Screw, Table
Size 450mm x 950mm. S/No. V82006323 (2006)
Please Note: This Item excludes Tooling
Please Note: This Item is located in Newton Abbot,
Unfortunately there are no loading facilities at this site.
Dismantling and Loading will be at the cost of the
purchaser