2411 - Large Capacity Vertical & Horizontal Borers and other Conventional Equipment available due to the Reorganisation of a Major Valve Manufacturer due to the flooding of the site
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location:- These Items are located in Ayrshire, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.
Please Note: Some of this equipment has been subject to flash flooding. Various refurbishment has already been undertaken, however, we recommend that any potential purchaser should inspect the goods on site to acquaint themselves and make a full assessment of the overall condition and status of the equipment that they are interested in purchasing. Some of this equipment may require retrofitting. All items are sold in an ‘as is’ condition.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on + 39 0732 677 063 or email info@cottandco.it
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 21-30 de 89
Lot 21: Corona Model 15AY Pillar Drill
Corona Model 15AY Pillar Drill, Rise & Fall Table, Machine
No. GLOOEM006. S/No. 260 40E
Please Note: This Item is located in Ayrshire, Unfortunately
there are no loading facilities available. Dismantling and Loading
will be at the cost of the purchaser.
Please Note: Some of this equipment has been subject to flash flooding. Various refurbishment has already been undertaken, however, we recommend that any potential purchaser should inspect the goods on site to acquaint themselves and make a full assessment of the overall condition and status of the equipment that they are interested in purchasing. Some of this equipment may require retrofitting. All items are sold in an ‘as is’ condition.
Lot 22: Webster & Bennett 48’’ Chuck
Webster & Bennett 48’’ Chuck. S/No. 412610
Please Note: For Spares & Repairs
Please Note: This Item is located in Ayrshire, Unfortunately
there are no loading facilities available. Dismantling and Loading
will be at the cost of the purchaser.
Some of this equipment has been subject to flash flooding. Various refurbishment has already been undertaken, however, we recommend that any potential purchaser should inspect the goods on site to acquaint themselves and make a full assessment of the overall condition and status of the equipment that they are interested in purchasing. Some of this equipment may require retrofitting. All items are sold in an ‘as is’ condition.
Lot 23: Bridgeport Series Interact 1 Milling Machine with Heidenhain TNC 145 Control
Bridgeport Series Interact 1 Milling Machine with Heidenhain TNC
145 Control, Table Size 34’’ x 12’’. Machine No. GL00EM008. S/No.
17840484B
Please Note: This Item is located in Ayrshire, Unfortunately
there are no loading facilities available. Dismantling and Loading
will be at the cost of the purchaser.
Please Note: Some of this equipment has been subject to flash flooding. Various refurbishment has already been undertaken, however, we recommend that any potential purchaser should inspect the goods on site to acquaint themselves and make a full assessment of the overall condition and status of the equipment that they are interested in purchasing. Some of this equipment may require retrofitting. All items are sold in ...
Lot 24: Amada Cut Master HA-400 Horizontal Bandsaw
Amada Cut Master HA-400 Horizontal Bandsaw, Machine No. GL00E M014. S/No. 401100
Please Note: This Item is located in Ayrshire, Unfortunately
there are no loading facilities available. Dismantling and Loading
will be at the cost of the purchaser.
Please Note: Some of this equipment has been subject to flash flooding. Various refurbishment has already been undertaken, however, we recommend that any potential purchaser should inspect the goods on site to acquaint themselves and make a full assessment of the overall condition and status of the equipment that they are interested in purchasing. Some of this equipment may require retrofitting. All items are sold in an ‘as is’ condition.
Lot 25: Midsaw Horizontal Bandsaw
Midsaw Horizontal Bandsaw, Machine No. GL00E M015. S/No. E6795
Please Note: This Item is located in Ayrshire, Unfortunately
there are no loading facilities available. Dismantling and Loading
will be at the cost of the purchaser.
Please Note: Some of this equipment has been subject to flash flooding. Various refurbishment has already been undertaken, however, we recommend that any potential purchaser should inspect the goods on site to acquaint themselves and make a full assessment of the overall condition and status of the equipment that they are interested in purchasing. Some of this equipment may require retrofitting. All items are sold in an ‘as is’ condition.
Lot 26: Bar Center
Bar Center
Please Note: This Item is located in Ayrshire, Unfortunately
there are no loading facilities available. Dismantling and Loading
will be at the cost of the purchaser.
Please Note: Some of this equipment has been subject to flash flooding. Various refurbishment has already been undertaken, however, we recommend that any potential purchaser should inspect the goods on site to acquaint themselves and make a full assessment of the overall condition and status of the equipment that they are interested in purchasing. Some of this equipment may require retrofitting. All items are sold in an ‘as is’ condition.
Lot 27: White Type WKT 26/26 Table Saw
White Type WKT 26/26 Table Saw, 15’’ Blade. Machine No.
GL00EM013. S/No. 22611
Please Note: This Item is located in Ayrshire, Unfortunately
there are no loading facilities available. Dismantling and Loading
will be at the cost of the purchaser.
Please Note: Some of this equipment has been subject to flash flooding. Various refurbishment has already been undertaken, however, we recommend that any potential purchaser should inspect the goods on site to acquaint themselves and make a full assessment of the overall condition and status of the equipment that they are interested in purchasing. Some of this equipment may require retrofitting. All items are sold in an ‘as is’ condition.
Lot 28: Wadkin Type CJ113 Cross Cut Table Saw
Wadkin Type CJ113 Cross Cut Table Saw, Machine No. GL00EM010.
S/No. 363813
Please Note: This Item is located in Ayrshire, Unfortunately
there are no loading facilities available. Dismantling and Loading
will be at the cost of the purchaser.
Please Note: Some of this equipment has been subject to flash flooding. Various refurbishment has already been undertaken, however, we recommend that any potential purchaser should inspect the goods on site to acquaint themselves and make a full assessment of the overall condition and status of the equipment that they are interested in purchasing. Some of this equipment may require retrofitting. All items are sold in an ‘as is’ condition.
Lot 29: Avery Type 6405 Hardness Tester
Avery Type 6405 Hardness Tester, 3,000kg Capacity. S/No. 6405
Please Note: This Item is located in Ayrshire, Unfortunately
there are no loading facilities available. Dismantling and Loading
will be at the cost of the purchaser.
Please Note: Some of this equipment has been subject to flash flooding. Various refurbishment has already been undertaken, however, we recommend that any potential purchaser should inspect the goods on site to acquaint themselves and make a full assessment of the overall condition and status of the equipment that they are interested in purchasing. Some of this equipment may require retrofitting. All items are sold in an ‘as is’ condition.
Lot 30: 14’’ Grinder
14’’ Grinder
Please Note: This Item is located in Ayrshire, Unfortunately
there are no loading facilities available. Dismantling and Loading
will be at the cost of the purchaser.