2343- CNC & Conventional Machinery no longer required due to reinvestment at DFG Manufacturing & Others, Phase 2

Engineering

L'enchère s'est terminée le

2014-10-23 15:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Location: These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Prime d'acheteur

'La prime d''acheteur sera fixée à 16.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'

Temps de consultation

Viewing by Appointment only with the Auctioneer, please contact our Office on: + 44 (0) 121 328 2424

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.
Documentation TVA

Veuillez cocher la case ci-dessous et cliquer sur confirmer

* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2014-10-27 17:00:00.0

'Date limite d''apurement'

2014-11-06 17:00:00.0

'Agents d''expédition'

'Liste des agents d''expédition'

Sous-traitants pour le stockage

Liste des sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Exporter/Importer des détails du Royaume-Uni

Informations importantes

Lots 31-40 de 61

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
23 oct. 2014 15:10:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 124: Jones & Shipman Type 1305 Toolroom Universal Grinding Machine

Jones & Shipman Type 1305 Toolroom Universal Grinding Machine, Capacity 40" x 10". Complete with Internal 3 Jaw Chuck & 2 Point Steady. Wheel Dresser

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
23 oct. 2014 16:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 124a: Jones & Shipman Type 1070 Auto Production Cyclindrical Grinder

Jones & Shipman Type 1070 Auto Production Cyclindrical Grinder, Capacity 6" x 12". Marposs Gauging System. Coolant

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
23 oct. 2014 16:20:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 125: Jones & Shipman Type 540LAP Surface Grinder

Jones & Shipman Type 540LAP Surface Grinder, Capaity 18" x 6", Variable Feed, 18" x 6" Magentic Chuck

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
23 oct. 2014 15:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 126: Delapena Speedhone Horizontal Floorstanding Honing Machine

Delapena Speedhone Horizontal Floorstanding Honing Machine

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
23 oct. 2014 16:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 127: Jones & Shipman Tool & Cutter Grinder

Jones & Shipman Tool & Cutter Grinder with fully Universal Jones & Shipman 4" Machine Vice

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
23 oct. 2014 15:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 128: EWU Rotomat 180 Wire Brush Deburring Machine

EWU Rotomat 180 Wire Brush Deburring Machine, Spindle Speed 2000rpm,Maximum Capacity 180mm (2007)

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
23 oct. 2014 15:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 128a: Butler 8'' Precision Toolroom Slotter

Butler 8'' Precision Toolroom Slotter, Strokes 1'' - 8''. Cycles per Minute: 35, 51, 77 & 115. Table Size 20'' Diameter, Tilting Ram, Power Feeds and Indexing on Table

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
23 oct. 2014 15:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 129: Varnamo Type FV-2KM Vertical Milling Machine

Varnamo Type FV-2KM Vertical Milling Machine, Table Size 60" x 12", Swivel Head, 50 Int Spindle, Quill Feed, Speeds 40 - 1800rpm, 3 Axis Digital Readout

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
23 oct. 2014 15:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 130: Parkson Type 2N Universal Milling Machine

Parkson Type 2N Universal Milling Machine, Table Size 51" x 11 1/2", Spindle Speeds 58 to 1500rpm, Universal Vertical Head, Swiveling Table

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
23 oct. 2014 16:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 131: Adcock & Shipley Type 2JUR Universal Milling Machine

Adcock & Shipley Type 2JUR Universal Milling Machine, Table Size 50" x 10". Swiveling Table, Taper: 50 INT in Vertical and Horizontal, Speeds 30 To 1200rpm with Universal Vertical Head

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories