2257 - Equipment no longer required due to the Retirement of the Directors at Gramton Engineering Company Ltd & Others, Phase 2
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location:- These Items are located in Ashton-Under-Lyne, Lancashire and Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Clearance Dates - Due to the Christmas break the removal dates for these items will be as follows:
Up until Thursday 19th December 2013
and then from:
6th January 2014 to 16th January 2014
(There will be no clearance on site between 20th December 2013 and 5th January 2014 inclusive)
Prime d'acheteur
'La prime d''acheteur sera fixée à 15.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing by Appointment only with the Auctioneer, please contact our Office on: + 44 (0) 121 328 2424
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 61-70 de 94
Lot 58: WMW GLAUCHAU Type SIP 400 x 500 Internal Grinding Machine
WMW GLAUCHAU Type SIP 400 x 500 Internal Grinding Machine with Face Dressing, Chuck Size 500mm.
Please Note:- This Item is located in Ashton-Under-Lyne, Lancashire and will be loaded by an Overhead Crane free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 59: HAHN & KOLB Two Wheel Double Sided Fine Grinding Machine
HAHN & KOLB Two Wheel Double Sided Fine Grinding Machine, 30" Diameter Grinding Wheels.
Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 60: Churchill Type NB Toolroom Surface Grinder
Churchill Type NB Toolroom Surface Grinder with 20" x 8" Capacity.
Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 61: Union G24S Double Ended Pedestal Grinder
Union G24S Double Ended Pedestal Grinder with 24" Dia x 3" Wide Wheel, Max Peripheral Speed, 6000 s.f.p.m and Spindle Speeds 980 rpm
Please Note: These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 62: Meddings Double Ended Tilting Table Tool Lapper
Meddings Double Ended Tilting Table Tool Lapper
Please Note: These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 63: Lapmaster 15 Bench type Lapping Machine
Lapmaster 15 Bench type Lapping Machine with 15" Dia Lapping Plate, 1.3 Max HP, Fluid Distribution Cabinet with Timer, Single Phase
Please Note: These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 64: Snap on Garage Press
Snap on Garage Press with 20" Distance Between Uprights, 35" Maximum Daylight, 15 Ton (approx)
Please Note: These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 65: Grimson Double Ended Pedestal Grinder with 6" Diameter
Grimson Double Ended Pedestal Grinder with 6" Diameter
Please Note: These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 66: Hare Nsft 15 Ton C Frame High Speed Hydraulic Press
Hare Nsft 15 Ton C Frame High Speed Hydraulic Press, Maximum Stroke/Daylight 550mm, Table Size 700mm x 500mm, Die Cushion Ejection, Interlock Guarding (1996)
Please Note: These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 67: Norton Closed Frame Hydraulic Press
Norton Closed Frame Hydraulic Press, Max 20 Ton, 24" Between Frames. 24" Maximum Stroke/Daylight, Table Size 24" x 12", Auto and Manual Operation, Interlock Guards
Please Note: These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.