2414 – CNC & Conventional Equipment no longer required due to Restructuring at H.Mullins (Earby) Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location:- These Items are located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on + 39 0732 677 063 or email info@cottandco.it
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 41-50 de 80
Lot 27: Maho MH2000 with Philips Control
Maho MH2000 with Philips Control, Table 1800mm x 800mm,
Horizontal Spindle in Ram, Vertical Head. S/No. 20297
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Lot 28: Coupe Hugot Soretex Levage Type 2.62 Rotoform Extrusion Tube/Pipe Bender
Coupe Hugot Soretex Levage Type 2.62 Rotoform Extrusion
Tube/Pipe Bender, 16’’ 3-Jaw Chuck, Travel X Axis 130’’.
S/No. 33856-116
Please click here for Coupe Hugot Pipe Bending Machine Technical Data Sheets
Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 29: Coupe Hugot Selection of Tooling
Coupe Hugot Selection of Tooling
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination Lot of Lots 28 & 29
Coupe Hugot Soretex Levage Type 2.62 Rotoform Extrusion
Tube/Pipe Bender, 16’’ 3-Jaw Chuck, Travel X Axis 130’’.
S/No. 33856-116
and
Coupe Hugot Selection of Tooling
Please Note: These Items are located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 28 | Coupe Hugot Soretex Levage Type 2.62 Rotoform Extrusion Tube/Pipe Bender |
| 29 | Coupe Hugot Selection of Tooling |
Lot 31: Exel 40 M Heavy Duty Conventional Lathe
Exel 40 M Heavy Duty Conventional Lathe, 40'' Swing over bed,
30'' Swing over cross slide, 118'' distance between centres, 6.3 to
850 RPM Speeds, 16'' 3-Jaw Chuck, 31'' 4-Jaw Chuck, 5’’ Spindle
Bore, Quick Change Tool Post, Travelling Steady, Fixed Steady,
Accurite DRO. S/No. 00221007
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Lot 32: Colchester Triumph 2000 Gap Bed Lathe
Colchester Triumph 2000 Gap Bed Lathe, Quick Change Tool Post,
10'' 3-Jaw Chuck, 12'' 4-Jaw Chuck, Fixed Steady, Mitutoyo 2-Axis
DRO, Speeds 25-2000 RPM, Distance B.C.50’’. S/No. 6004472413
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Lot 33: Colchester Triumph 2500 Lathe
Colchester Triumph 2500 Lathe, Quick Change Tool Post, Fixed
Steady, Newall 2 Axis Dro, 10’’ 3 –Jaw Chuck, 14'' Face Plate, 50''
Between Centres, Gap Bed. S/No. VT2000466
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Lot 34: Colchester Triumph 2000 Lathe
Colchester Triumph 2000 Lathe, 50’’ between centres, Gap Bed,
10'' 3-Jaw Chuck, 12'' 4-Jaw Chuck, Speeds 25-2000 RPM, Quick
Change Tool Post. S/No. 60010.02967
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Lot 35: Bridgeport Turret Mill
Bridgeport Turret Mill, Power Longitudinal Table Feed, Speeds
190-2500 RPM, Heidenhain 2 Axis DRO, Table Size 36'' x 9'', Power
Longitudinal Table Feed. S/No. 445610388X
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Lot 36: Tai-i Electron Spark Erosion Machine with 50 AMP Pulser Control
Tai-i Electron Spark Erosion Machine with 50 AMP Pulser Control,
50/60 HZ, Table 700mm x 400mm, Tank 1000mm x 600mm x 400mm deep,
Mitutoyo 2 Axis Dro. S/No. CT 8806 NU (1988)
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.