2414 – CNC & Conventional Equipment no longer required due to Restructuring at H.Mullins (Earby) Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location:- These Items are located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on + 39 0732 677 063 or email info@cottandco.it
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 31-40 de 80
Lot 17: Maho MH1000 C Machining Centre with Grundig Numeric Pilot Control
Maho MH1000 C Machining Centre with Grundig Numeric Pilot
Control, Table Size 1100mm x 800mm, 50 INT Taper. S/No. 11105
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Lot 18: Deckel Maho DMC 103V Machining Centre with Heidenhain TNC 426/430M Control
Deckel Maho DMC 103V Machining Centre with Heidenhain TNC
426/430M Control, Renishaw Prove, Table Size 1200mm x 600mm,
24-Position ATC, 4th Axis & 6’’ 3-Jaw Chuck and Tailstock
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Lot 19: Deckel Maho DMC 63V Machining Centre with Heidenhain TNC 426 Control
Deckel Maho DMC 63V Machining Centre with Heidenhain TNC 426
Control, Table Size 800mm x 500mm, 24-Position ATC.
S/No. 28850011562
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Lot 20: Deckel Maho DMC 103V Machining Centre with Heidenhain TNC 426/430 Control
Deckel Maho DMC 103V Machining Centre with Heidenhain TNC
426/430 Control, 24-Position ATC, Table 1200mm x 600mm. S/No.
28860007802
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Lot 21: Cincinnati Arrow 1250 Machining Centre with Acramatic A2100 Control
Cincinnati Arrow 1250 Machining Centre with Acramatic A2100
Control, 24-Position ATC, Table Size 1500mm x 750mm.
S/No. 7055-A00-KK0090
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Lot 22: Cincinnati Arrow 2-Series Machining Centre with Acramatic A2100 Control
Cincinnati Arrow 2-Series Machining Centre with Acramatic A2100
Control,
22-Position ATC, Table Size 700mm x 500mm. S/No. 7042 A0A
KH2392
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Lot 23: Kira VTC 30 Turret Drill Mill Centre with Fanuc O Mate M Control
Kira VTC 30 Turret Drill Mill Centre with Fanuc O Mate M
Control, Table Size 500mm x 300mm, 10 STN Turret, 4th Axis PNC 500
Indexer. S/No. 31278
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Lot 24: Kira KN 6V Turret Drill Mill Centre with Fanuc OM Control
Kira KN 6V Turret Drill Mill Centre with Fanuc OM Control, Table
Size 1000mm x 300mm, 8 STN Turret. S/No. 10213
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Lot 25: Maho 600 E with Phillips Control
Maho 600 E with Phillips Control, Rotary Table 500mm Dia, Speeds
80-4000 RPM, Swivel Head. S/No. 64608
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Lot 26: Maho MAT with Maho CNC 432 Control
Maho MAT with Maho CNC 432 Control, Table 900mm x 600mm, Rotary
Table 350mm DIA, 24-Position ATC. S/No. 98080
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.