2361 - Due to investment in new machinery, equipment surplus to requirements of; FSG Tool & Die Ltd, Addmore Engineering Ltd and Others
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location:- These Items are located in Bedfordshire, Birmingham and Gloucester
Lots located in Birmingham will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Please click here to view a Brochure for this auction
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer, please contact our Office on: +44 (0) 121 328 2424
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 62
Lot 1: Bridgeport Model VMC 1000 XP Machining Center with Heidenhain ITNC 530 Control
Bridgeport Model VMC 1000 XP Machining Center with Heidenhain ITNC 530 Control. S/No. 320C228 (2006) Table Size 1200mm x 600mm, 30 Station ATC, Table Probe, Spindle Probe, BT40 Spindle, Through Spindle Coolant, 15,000 RPM, Spindle Chiller
Please Note: Excluding Fitments, Tooling and Toolholders
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 2: Bridgeport Model VMC1000 XP Machining Center with Heidenhain ITNC 530 Control
Bridgeport Model VMC1000 XP Machining Center with Heidenhain ITNC 530 Control. S/No. 320C266 (2006), Table Size 1200mm x 600mm, 30 Station ATC, Table Probe, Spindle Probe, BT40 Spindle, Through Spindle Coolant, 15,000 RPM, Spindle Chiller
Please Note: Excluding Fitments, Tooling and Toolholders
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 3: Bridgeport Model XP-760 Machining Center with Heidenhain ITNC 530 Control
Bridgeport Model XP-760 Machining Center with Heidenhain ITNC 530 Control. S/No. 310B081 (2005), Table Size 1000mm x 600mm, 30 Station ATC, Table Probe, Spindle Probe, BT40 Spindle, Through Spindle Coolant, 15,000 RPM, Spindle Chiller
Please Note: Excluding Fitments, Tooling and Toolholders
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 3A: Ferrari A17 Multi Axis CNC Machining Centre with E5200 CNC Control
Ferrari A17 Multi Axis CNC Machining Centre with E5200 CNC Control, 30-Station ATC, Swarf Conveyor, Coolant, Erowa Easy Heind ITS 116 Loading System, S/No. 98017
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 4: Cincinnati Lancer 2000 Vertical Machining Centre with Accramatic A2100 Control
Cincinnati Lancer 2000 Vertical Machining Centre with Accramatic A2100 Control, Table Size 2286mm x 765mm, Max Load 3000kg, 40 – 6000 RPM, BT50 Spindle, Twin Swarf Conveyors, Coolant. X = 2032mm, Y = 762mm, Z = 770mm. S/No. 7052 A00 RA 0022 (1998)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
This Lot does not include Any Tooling, Fixtures, or OE Unit that may be shown in the lot photographs
Lot 5: Heller MCP-H300 Twin Pallet Horizontal Machining Centre with Unipro CNC 90 Control
Heller MCP-H300 Twin Pallet Horizontal Machining Centre with Unipro CNC 90 Control, 630mm x 800mm Pallet Size, 1 Degree Indexing, DIN 50 Spindle, 52 ATC, Swarf Conveyor, Knoll Coolant System, Coolant Chiller, X = 1000mm, Y = 800mm, Z = 1100mm. S/No. 34-43429 (1998) with Tooling
Please Note: This Item is located in Birmingham - Unfortunately there are no loading facilities for this machine - Dismantling & Loading will be at the cost of the purchaser
Lot 5A: Blum Type P82 - 0151 - 077 - 1 Probe & CAT 50 Probe with Sensor
Blum Type P82 - 0151 - 077 - 1 Probe. S/No. 961606 and CAT 50 Probe with Sensor
Please Note: This Item is located in Birmingham
Lot 5B: CAT 50 Tooling
CAT 50 Tooling
Please Note: This Item is located in Birmingham
Lot 5C: CAT 50 Tooling
CAT 50 Tooling
Please Note: This Item is located in Birmingham
Lot 5D: CAT 50 Tooling
CAT 50 Tooling
Please Note: This Item is located in Birmingham