2343- CNC & Conventional Machinery no longer required due to reinvestment at DFG Manufacturing & Others, Phase 2

Engineering

L'enchère s'est terminée le

2014-10-23 15:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Location: These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Prime d'acheteur

'La prime d''acheteur sera fixée à 16.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'

Temps de consultation

Viewing by Appointment only with the Auctioneer, please contact our Office on: + 44 (0) 121 328 2424

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.
Documentation TVA

Veuillez cocher la case ci-dessous et cliquer sur confirmer

* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2014-10-27 17:00:00.0

'Date limite d''apurement'

2014-11-06 17:00:00.0

'Agents d''expédition'

'Liste des agents d''expédition'

Sous-traitants pour le stockage

Liste des sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Exporter/Importer des détails du Royaume-Uni

Informations importantes

Lots 1-10 de 61

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
23 oct. 2014 16:40:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 100: Hitachi Seiki Type VA40 Vertical Machining Centre

Hitachi Seiki Type VA40 Vertical Machining Centre with Fanuc 6M Control, Table Size 1250mm x 450mm.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
23 oct. 2014 15:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 101: Bridgeport Type BPC 520 VOM Vertical Machining Centre with GE Fanuc OM Control

Bridgeport Type BPC 520 VOM Vertical Machining Centre with GE Fanuc OM Control, Table Size 800mm x 380mm

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
23 oct. 2014 15:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 101a: Webster Bennett 36" M Type Vertical Borer

Webster Bennett 36" M Type Vertical Borer, Table Size 36". Maximum Swing on Table 48", Maximum Daylight 26", Speeds 13.5 to 300rpm, Screw Cutting & Gears

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
23 oct. 2014 16:40:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 102: Ajax CNC Centre Lathe with GE Fanuc Series 2li-TB Control

Ajax CNC Centre Lathe with GE Fanuc Series 2li-TB Control, Swing Over Bed 600mm. Distance Between Centres 2000mm. 8 Station Indexing Tool Post. Spindle Bore 110mm. 400mm 3 Jaw Chuck. (2005)

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
23 oct. 2014 15:40:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 103: Ajax Premier Type 260 CNC Gap Bed Centre Lathe with Fagor Control

Ajax Premier Type 260 CNC Gap Bed Centre Lathe with Fagor Control, 3-Point Steady, 12" 3 Jaw Chuck, Swing over Bed 540mm, Swing in Gap 740mm, Between Centres 1600mm Spindle Bore 80mm, Speeds 0-1700rpm with Front & Rear Quick Change Toolpost

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
23 oct. 2014 15:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 103a: Mazak Quick Turn 8 CNC Lathe with Bar Feed

Mazak Quick Turn 8 CNC Lathe with Bar Feed, Mazatrol Cam T-2 Control, Standard Cutting Diameter 100mm, Maximum Cutting Diameter 160mm, Maximum Bar Material Cutting 32mm, Maximum Length of Work 250mm

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
23 oct. 2014 15:40:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 104: XYZ Mini Mill 560 Vertical Machining Centre

XYZ Mini Mill 560 Vertical Machining Centre, X Travel 560mm. Y Travel 400mm. Z Travel 500mm. Table Size 610 x 370mm. Spindle Centre To Column 455mm. Spindle To Table 100 - 600mm. Spindle Taper BT40. Spindle Speeds 5-8000rpm. Auto Tool Changer 16 Station. Siemens Sinumerik 810D/840D CNC Control (2006)

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
23 oct. 2014 16:10:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 104a: XYZ 4000 CNC Bed Mill with ProtoTrak MX2 Control

XYZ 4000 CNC Bed Mill with ProtoTrak MX2 Control, Table Size 58" x 14". X Axis 40", Y Axis 20", Head Travel 23", Spindle Taper 40 ISO, Spindle Speeds 70-3600rpm, Power Draw Bar (1996)

Please note: This machine needs attention

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
23 oct. 2014 15:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 105: Joemars Model JM325DZ Small Hole Electrical Discharge Machine

Joemars Model JM325DZ Small Hole Electrical Discharge Machine with Carmar SW 5000 Fuzzy Control, Table Size 460mm x 210mm, X & Y Travel 330mm x 200mm, Ram Servo Travel 345mm, Max Electrode Length 400mm, Electrode Size 0.3mm - 3mm. Max Peak Current 38A, Peak Current Settings - 15 Steps 0.3A to 38A (2005)

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
23 oct. 2014 16:20:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 106: Abac Model VT30 Rotary Screw Air Compressor

Abac Model VT30 Rotary Screw Air Compressor, Power 22Kw, Pressure 8 Bar, Air Displacement 3.32 M/Min, Cubic Feet Per Minute 120, Noise Level: 72dB (A), Run Hours 56320 (1997)

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories