2328C - Assembly Equipment previously used in an Outstanding Ultra High Precision Machining Facility at Meister Benelux, Belgium

In Zusammenarbeit mit

Engineering

Auktion beendet am

2014-10-15 14:30:00.0

Verbleibende Zeit

Auktion beendet

Artikelbeschreibung

Location: These Items are located in Sprimont, Belgium

A sole contractor has been appointed to disconnect and load all of the machinery for these auctions - please see full details in the 'specific conditions' under the notice to purchasers section

Sole Contractor contact Information:
DDM Belgium N.V
Geleenlaan 24, B-3600 Genk, Belgium
Tel: + 32 89 32 00 32 Mobile: + 32 474 93 02 51 Fax: + 32 89 32 00 30
Email: joris.beens@ddm.eu Website: www.ddm.eu

Auction is held at 14:30 (UK Time) - 15:30 (CET Time)

Please Click here to view the English Version of the Meister Brochure

Please Click here to view the French Version of the Meister Brochure

VAT Reverse Charges apply to this auction

This Auction is being held in association with Hilco Industrial Acquisitions BV - Amsterdam whom the purchaser will receive an invoice from

Käuferprovision

Es gilt ein Aufgeld von 16.00 %.

Mehrwertsteuer

Zzgl. Mehrwertsteuer in Höhe von 0.00 %.

Seitenaufrufe

Viewing is available on the 1st and 2nd October 2014, by appointment only with the Auctioneer, please contact our Office on: +44 (0) 121 328 2424

Der Käufer ist auf seine Kosten für das Abklemmen, Abbauen und Entfernen der gekauften Gegenstände vom Versteigerungsort verantwortlich. Beabsichtigt der Käufer, bei der Auktion erworbene Gegenstände zu exportieren, ist er auf eigene Kosten dafür verantwortlich, die Einhaltung aller britischen Exportbedingungen und den Erhalt aller anwendbaren Ausfuhrlizenzen sicherzustellen

Ausweis der Mehrwertsteuer

* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.

Hinweis für die Käufer

Datum der letzten Zahlung

2014-10-17 17:00:00.0

Endgültiges Freigabedatum

2014-11-14 17:00:00.0

Versandunternehmen

Liste der Versandunternehmen

Lagerfirma

Liste der Lagerfirmen

2328C - Assembly Equipment previously used in an Outstanding Ultra High Precision Machining Facility at Meister Benelux, Belgium

In Zusammenarbeit mit

Engineering

Auktion beendet am

Verbleibende Zeit

Artikelbeschreibung

Location: These Items are located in Sprimont, Belgium

A sole contractor has been appointed to disconnect and load all of the machinery for these auctions - please see full details in the 'specific conditions' under the notice to purchasers section

Sole Contractor contact Information: DDM Belgium N.V Geleenlaan 24, B-3600 Genk, Belgium Tel: + 32 89 32 00 32 Mobile: + 32 474 93 02 51 Fax: + 32 89 32 00 30 Email: joris.beens@ddm.eu Website: www.ddm.eu

Auction is held at 14:30 (UK Time) - 15:30 (CET Time)

VAT Reverse Charges apply to this auction

This Auction is being held in association with Hilco Industrial Acquisitions BV - Amsterdam whom the purchaser will receive an invoice from

Käuferprovision

Mehrwertsteuer

Seitenaufrufe

Viewing is available on the 1st and 2nd October 2014, by appointment only with the Auctioneer, please contact our Office on: +44 (0) 121 328 2424

Hinweis für die Käufer

Datum der letzten Zahlung

Endgültiges Freigabedatum

Versandunternehmen

Lagerfirma

Details zum Exportieren/Importieren aus Großbritannien

Gesonderte Bedingungen

Wichtige Informationen

Lose 31-37 von 37

Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €200 , please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required

Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €200 , please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required

Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €300 , please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required

Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €200 , please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required

Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €200 , please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required

Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €200 , please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required

Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €1500 , please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required

Kategorien

Sole Contractor contact Information:
DDM Belgium N.V
Geleenlaan 24, B-3600 Genk, Belgium
Tel: + 32 89 32 00 32 Mobile: + 32 474 93 02 51 Fax: + 32 89 32 00 30
Email: joris.beens@ddm.eu Website: www.ddm.eu