2328B - Inspection & General Workshop Equipment previously used in an Outstanding Ultra High Precision Machining Facility at Meister Benelux, Belgium

En collaboration avec

Engineering

L'enchère s'est terminée le

2014-10-15 13:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Location: These Items are located in Sprimont, Belgium

A sole contractor has been appointed to disconnect and load all of the machinery for these auctions - please see full details in the 'specific conditions' under the notice to purchasers section

Sole Contractor contact Information:
DDM Belgium N.V
Geleenlaan 24, B-3600 Genk, Belgium
Tel: + 32 89 32 00 32         Mobile: + 32 474 93 02 51                Fax: + 32 89 32 00 30
Email: joris.beens@ddm.eu     Website: www.ddm.eu

Auction is held at 13:00 (UK Time) - 14:00 (CET Time)

Please Click here to view the English Version of the Meister Brochure

Please Click here to view the French Version of the Meister Brochure

VAT Reverse Charges apply to this auction


This Auction is being held in association with Hilco Industrial Acquisitions BV - Amsterdam whom the purchaser will receive an invoice from

Prime d'acheteur

'La prime d''acheteur sera fixée à 16.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 0.00%.'

Temps de consultation

Viewing is available on the 1st and 2nd October 2014, by appointment only with the Auctioneer, please contact our Office on: +44 (0) 121 328 2424

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2014-10-17 17:00:00.0

'Date limite d''apurement'

2014-11-14 17:00:00.0

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Conditions spécifiques

Lots 1-10 de 84

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
15 oct. 2014 14:40:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
0.00%

Lot 250: Taylor Hobson Talyrond 365 Roundness Tester

Taylor Hobson Talyrond 365 Roundness Tester, Max. Height 300mm, Max. dia. 400mm, 230V AC, CE with PC S/No. TR365-131

Please Note: This Item is located in Sprimont, Belgium

Please Note: The Fee for disconnecting  and loading this item to a suitable vehicle is €250 , please note this price does not include packing or strapping - this is at the responsibility of the buyer.  This can be done by DDM at extra cost if required

Preview image
Fin:
15 oct. 2014 13:20:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
0.00%

Lot 251: Taylor Hobson Form Talysurf 50 Perthometer

Taylor Hobson Form Talysurf 50 Perthometer, 50mm, Intra. System No. FTSi-6891, with PC. S/No. 439

Please Note: This Item is located in Sprimont, Belgium

Please Note: The Fee for disconnecting  and loading this item to a suitable vehicle is €250 , please note this price does not include packing or strapping - this is at the responsibility of the buyer.  This can be done by DDM at extra cost if required

Preview image
'Prime d''acheteur:'
16.00%
Taux de TVA:
0.00%

Lot 252: Tesa Rugosurf 90G Roughness Tester/Gauge

Tesa Rugosurf 90G Roughness Tester/Gauge with Granite Table 1200x800mm. S/No. 0693012

Please Note: This Item is located in Sprimont, Belgium

Please Note: The Fee for disconnecting  and loading this item to a suitable vehicle is €125 , please note this price does not include packing or strapping - this is at the responsibility of the buyer.  This can be done by DDM at extra cost if required

Preview image
Fin:
15 oct. 2014 13:20:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
0.00%

Lot 253: Tesa Scope Model: 06830025 500V Projector with TS200 System

Tesa Scope Model: 06830025 500V Projector with TS200 System, 110/240V AC. S/No. 1V001, (2005)

Please Note: This Item is located in Sprimont, Belgium

Please Note: The Fee for disconnecting  and loading this item to a suitable vehicle is €200 , please note this price does not include packing or strapping - this is at the responsibility of the buyer.  This can be done by DDM at extra cost if required

Preview image
Fin:
15 oct. 2014 13:20:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
0.00%

Lot 254: Tesa Model 02430000 Scan 25 Form Tester Inspection Machine

Tesa Model 02430000 Scan 25 Form Tester Inspection Machine, 110/240V, with PC. S/No. TN25060301-00 (2006)

Please Note: This Item is located in Sprimont, Belgium

Please Note: The Fee for disconnecting  and loading this item to a suitable vehicle is €200 , please note this price does not include packing or strapping - this is at the responsibility of the buyer.  This can be done by DDM at extra cost if required

Preview image
Fin:
15 oct. 2014 13:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
0.00%

Lot 255: Deltronic DH216 Projector

Deltronic DH216 Projector with Deltronic 612.R, DH216-612-R, 307077927, 115/230V

Please Note: This Item is located in Sprimont, Belgium

Please Note: The Fee for disconnecting  and loading this item to a suitable vehicle is €150 , please note this price does not include packing or strapping - this is at the responsibility of the buyer.  This can be done by DDM at extra cost if required

Preview image
Fin:
15 oct. 2014 14:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
0.00%

Lot 256: Mahr Pertmen Type PST-NSE Perthometer PRN

Mahr Pertmen Type PST-NSE Perthometer PRN with S4P and PC S/No. 6851311

Please Note: This Item is located in Sprimont, Belgium

Please Note: The Fee for disconnecting  and loading this item to a suitable vehicle is €125 , please note this price does not include packing or strapping - this is at the responsibility of the buyer.  This can be done by DDM at extra cost if required

Preview image
Fin:
15 oct. 2014 13:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
0.00%

Lot 257: Granite Table 800mm x 1200mm on Steel Frame

Granite Table 800mm x 1200mm on Steel Frame, Roundness Tester and Gauge (1999)

Please Note: This Item is located in Sprimont, Belgium

Please Note: The Fee for disconnecting  and loading this item to a suitable vehicle is €200 , please note this price does not include packing or strapping - this is at the responsibility of the buyer.  This can be done by DDM at extra cost if required

Preview image
Fin:
15 oct. 2014 13:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
0.00%

Lot 258: Mitutoyo BX303 Coordinate Measuring Machine with Renishaw MIP Probe

Mitutoyo BX303 Coordinate Measuring Machine with Renishaw MIP Probe. S/No. 8903403

Please Note: This Item is located in Sprimont, Belgium

Please Note: The Fee for disconnecting  and loading this item to a suitable vehicle is €200 , please note this price does not include packing or strapping - this is at the responsibility of the buyer.  This can be done by DDM at extra cost if required

Preview image
Fin:
15 oct. 2014 14:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
0.00%

Lot 259: Mahr MMQ40 Formtester

Mahr MMQ40 Formtester, 110/230V. S/No. S440064 (1999)

Please Note: This Item is located in Sprimont, Belgium

Please Note: The Fee for disconnecting  and loading this item to a suitable vehicle is €125 , please note this price does not include packing or strapping - this is at the responsibility of the buyer.  This can be done by DDM at extra cost if required

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories