2328A - Engineering Ancillaries previously used in an Outstanding Ultra High Precision Machining Facility at Meister Benelux, Belgium

En collaboration avec

Engineering

L'enchère s'est terminée le

2014-10-14 14:30:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Location: These Items are located in Sprimont, Belgium

A sole contractor has been appointed to disconnect and load all of the machinery for these auctions - please see full details in the 'specific conditions' under the notice to purchasers section

Sole Contractor contact Information:
DDM Belgium N.V
Geleenlaan 24, B-3600 Genk, Belgium
Tel: + 32 89 32 00 32 Mobile: + 32 474 93 02 51 Fax: + 32 89 32 00 30
Email: joris.beens@ddm.eu Website: www.ddm.eu

Auction is held at 14:30 (UK Time) - 15:30 (CET Time)

Please Click here to view the English Version of the Meister Brochure

Please Click here to view the French Version of the Meister Brochure

VAT Reverse Charges apply to this auction

This Auction is being held in association with Hilco Industrial Acquisitions BV - Amsterdam whom the purchaser will receive an invoice from

Prime d'acheteur

'La prime d''acheteur sera fixée à 16.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 0.00%.'

Temps de consultation

Viewing is available on the 1st and 2nd October 2014, by appointment only with the Auctioneer, please contact our Office on: +44 (0) 121 328 2424

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Documentation TVA

* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2014-10-16 17:00:00.0

'Date limite d''apurement'

2014-11-14 17:00:00.0

'Agents d''expédition'

'Liste des agents d''expédition'

Sous-traitants pour le stockage

Liste des sous-traitants pour le stockage

2328A - Engineering Ancillaries previously used in an Outstanding Ultra High Precision Machining Facility at Meister Benelux, Belgium

En collaboration avec

Engineering

L'enchère s'est terminée le

Temps restant

'Description de l''enchère'

Location: These Items are located in Sprimont, Belgium

A sole contractor has been appointed to disconnect and load all of the machinery for these auctions - please see full details in the 'specific conditions' under the notice to purchasers section

Sole Contractor contact Information: DDM Belgium N.V Geleenlaan 24, B-3600 Genk, Belgium Tel: + 32 89 32 00 32 Mobile: + 32 474 93 02 51 Fax: + 32 89 32 00 30 Email: joris.beens@ddm.eu Website: www.ddm.eu Auction is held at 14:30 (UK Time) - 15:30 (CET Time)

VAT Reverse Charges apply to this auction

This Auction is being held in association with Hilco Industrial Acquisitions BV - Amsterdam whom the purchaser will receive an invoice from

Prime d'acheteur

TVA

Temps de consultation

Viewing is available on the 1st and 2nd October 2014, by appointment only with the Auctioneer, please contact our Office on: +44 (0) 121 328 2424

Avis aux acheteurs

Date limite de paiement

'Date limite d''apurement'

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Conditions spécifiques

Informations importantes

Lots 131-140 de 142

Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €100, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required

Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €100, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required

Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €250, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required

Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €65, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required

Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €200, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required

Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €200, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required

Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €100, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required

Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €65, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required

Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €400, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required

Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €400, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required

Catégories

Sole Contractor contact Information:
DDM Belgium N.V
Geleenlaan 24, B-3600 Genk, Belgium
Tel: + 32 89 32 00 32 Mobile: + 32 474 93 02 51 Fax: + 32 89 32 00 30
Email: joris.beens@ddm.eu Website: www.ddm.eu

Auction is held at 14:30 (UK Time) - 15:30 (CET Time)