2328 - Machine Tools previously used in an Outstanding Ultra High Precision Machining Facility at Meister Benelux, Belgium
Engineering
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
Location: These Items are located in Sprimont, Belgium
A sole contractor has been appointed to disconnect and load all of the machinery for these auctions - please see full details in the 'specific conditions' under the notice to purchasers section
Sole Contractor contact Information:
DDM Belgium N.V
Geleenlaan 24, B-3600 Genk, Belgium
Tel: + 32 89 32 00 32 Mobile: + 32 474 93 02 51 Fax: + 32 89 32 00 30
Email: joris.beens@ddm.eu Website: www.ddm.eu
Auction is held at 1pm (UK Time) - 2pm (CET Time)
Please Click here to view the English Version of the Meister Brochure
Please Click here to view the French Version of the Meister Brochure
VAT Reverse Charges apply to this auction
This Auction is being held in association with Hilco Industrial Acquisitions BV - Amsterdam whom the purchaser will receive an invoice from
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 16.00%.
VAT
Stawka VAT wynosi 0.00 %.
Seitenaufrufe
Viewing is available on the 1st and 2nd October 2014, by appointment only with the Auctioneer, please contact our Office on: +44 (0) 121 328 2424
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Warunki specjalne
Przedmioty 41-50 z 92
Przedmiot 32: Hembrug Mikroturn 50 Slantbed CNC Hard Turning, High Precision Lathe with Siemens 840D Control
Hembrug Mikroturn 50 Slantbed CNC Hard Turning, High Precision Lathe with Siemens 840D Control. S/No. 70023176, Renishaw M15 Probe, 8-Station Turret & Parts Feeder (1998) with Staubli Unimation RX60 Automation Robotics Arm (2001)
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €1220, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Przedmiot 33: Traub TNS26DGY Multi Axis CNC Lathe with Traub System TX8F Control
Traub TNS26DGY Multi Axis CNC Lathe with Traub System TX8F Control, Sub-spindle, Twin Turrets (12-station) with Driven Tools. S/No. 241, Parts Catcher, Parts Conveyor, Tool Setting Scope, Iemca Mini Boss 32 CNC Magazine Barfeed. S/No. 96120202 (1996), Swarf Conveyor (192), HR 73488
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €1800, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 34: Tooling for Traub Machine
Tooling for Traub Machine
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €100, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *: Combination Bid to Include Lots 33 & 34
Traub TNS26DGY Multi Axis CNC Lathe with Traub System TX8F
Control, Sub-spindle, Twin Turrets (12-station) with Driven Tools.
S/No. 241, Parts Catcher, Parts Conveyor, Tool Setting Scope, Iemca
Mini Boss 32 CNC Magazine Barfeed. S/No. 96120202 (1996), Swarf
Conveyor (192), HR 73488
and
Tooling for Traub Machine
Please Note: These Items are located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €2050, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
33 | Traub TNS26DGY Multi Axis CNC Lathe with Traub System TX8F Control |
34 | Tooling for Traub Machine |
Przedmiot 35: Traub TNS26DGY Multi Axis CNC Lathe with Traub System TX8F Control
Traub TNS26DGY Multi Axis CNC Lathe with Traub System TX8F Control, Sub-spindle, Twin Turrets (12-station) with Driven Tools. S/No. 307 (1992), Parts Catcher, Parts Conveyor, Tool Setting Scope, Swarf Conveyor (1992) & Traub Stamag DN26 Magazine Barfeed
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €1800, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 36: Tooling for Traub Machine
Tooling for Traub Machine
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €100, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *: Combination Bid to Include Lots 35 & 36
Traub TNS26DGY Multi Axis CNC Lathe with Traub System TX8F Control, Sub-spindle, Twin Turrets (12-station) with Driven Tools. S/No. 307 (1992), Parts Catcher, Parts Conveyor, Tool Setting Scope, Swarf Conveyor (1992) & Traub Stamag DN26 Magazine Barfeed
and
Tooling for Traub Machine
Please Note: These Items are located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €2050, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
35 | Traub TNS26DGY Multi Axis CNC Lathe with Traub System TX8F Control |
36 | Tooling for Traub Machine |
Przedmiot 37: Mazak Quick Turn 8 CNC Lathe with Mazatrol CAM T-2 Control
Mazak Quick Turn 8 CNC Lathe with Mazatrol CAM T-2 Control, Turning Capacity 160 x 250mm, 8-Station Turret, Spindle 4500 RPM, Collet Chuck, Collets, 3-Jaw Chuck, Turret Tools, Tool Presetter & Tailstock
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €610, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Przedmiot 38: Schaublin 102 CNC Platern Lathe with Siemens Control
Schaublin 102 CNC Platern Lathe with Siemens Control. S/No. 330506
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €590, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Przedmiot 39: Chiron FZ08W Twin Pallet High Speed Vertical Machining Centre with Siemens Control
Chiron FZ08W Twin Pallet High Speed Vertical Machining Centre with Siemens Control, Pallets 550 x 300mm, 15,000 RPM Spindle, 12-Station ATC and Renishaw MP15P Probe. S/No. 204-65 (2001)
Please Note: This Item is located in Sprimont, Belgium