2328 - Machine Tools previously used in an Outstanding Ultra High Precision Machining Facility at Meister Benelux, Belgium
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These Items are located in Sprimont, Belgium
A sole contractor has been appointed to disconnect and load all of the machinery for these auctions - please see full details in the 'specific conditions' under the notice to purchasers section
Sole Contractor contact Information:
DDM Belgium N.V
Geleenlaan 24, B-3600 Genk, Belgium
Tel: + 32 89 32 00 32 Mobile: + 32 474 93 02 51 Fax: + 32 89 32 00 30
Email: joris.beens@ddm.eu Website: www.ddm.eu
Auction is held at 1pm (UK Time) - 2pm (CET Time)
Please Click here to view the English Version of the Meister Brochure
Please Click here to view the French Version of the Meister Brochure
VAT Reverse Charges apply to this auction
This Auction is being held in association with Hilco Industrial Acquisitions BV - Amsterdam whom the purchaser will receive an invoice from
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 0.00 %.
Seitenaufrufe
Viewing is available on the 1st and 2nd October 2014, by appointment only with the Auctioneer, please contact our Office on: +44 (0) 121 328 2424
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Gesonderte Bedingungen
Lose 41-50 von 92
Los 32: Hembrug Mikroturn 50 Slantbed CNC Hard Turning, High Precision Lathe with Siemens 840D Control
Hembrug Mikroturn 50 Slantbed CNC Hard Turning, High Precision Lathe with Siemens 840D Control. S/No. 70023176, Renishaw M15 Probe, 8-Station Turret & Parts Feeder (1998) with Staubli Unimation RX60 Automation Robotics Arm (2001)
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €1220, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Los 33: Traub TNS26DGY Multi Axis CNC Lathe with Traub System TX8F Control
Traub TNS26DGY Multi Axis CNC Lathe with Traub System TX8F Control, Sub-spindle, Twin Turrets (12-station) with Driven Tools. S/No. 241, Parts Catcher, Parts Conveyor, Tool Setting Scope, Iemca Mini Boss 32 CNC Magazine Barfeed. S/No. 96120202 (1996), Swarf Conveyor (192), HR 73488
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €1800, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 34: Tooling for Traub Machine
Tooling for Traub Machine
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €100, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos *: Combination Bid to Include Lots 33 & 34
Traub TNS26DGY Multi Axis CNC Lathe with Traub System TX8F
Control, Sub-spindle, Twin Turrets (12-station) with Driven Tools.
S/No. 241, Parts Catcher, Parts Conveyor, Tool Setting Scope, Iemca
Mini Boss 32 CNC Magazine Barfeed. S/No. 96120202 (1996), Swarf
Conveyor (192), HR 73488
and
Tooling for Traub Machine
Please Note: These Items are located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €2050, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLosnummer | Beschreibung |
---|---|
33 | Traub TNS26DGY Multi Axis CNC Lathe with Traub System TX8F Control |
34 | Tooling for Traub Machine |
Los 35: Traub TNS26DGY Multi Axis CNC Lathe with Traub System TX8F Control
Traub TNS26DGY Multi Axis CNC Lathe with Traub System TX8F Control, Sub-spindle, Twin Turrets (12-station) with Driven Tools. S/No. 307 (1992), Parts Catcher, Parts Conveyor, Tool Setting Scope, Swarf Conveyor (1992) & Traub Stamag DN26 Magazine Barfeed
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €1800, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 36: Tooling for Traub Machine
Tooling for Traub Machine
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €100, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos *: Combination Bid to Include Lots 35 & 36
Traub TNS26DGY Multi Axis CNC Lathe with Traub System TX8F Control, Sub-spindle, Twin Turrets (12-station) with Driven Tools. S/No. 307 (1992), Parts Catcher, Parts Conveyor, Tool Setting Scope, Swarf Conveyor (1992) & Traub Stamag DN26 Magazine Barfeed
and
Tooling for Traub Machine
Please Note: These Items are located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €2050, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLosnummer | Beschreibung |
---|---|
35 | Traub TNS26DGY Multi Axis CNC Lathe with Traub System TX8F Control |
36 | Tooling for Traub Machine |
Los 37: Mazak Quick Turn 8 CNC Lathe with Mazatrol CAM T-2 Control
Mazak Quick Turn 8 CNC Lathe with Mazatrol CAM T-2 Control, Turning Capacity 160 x 250mm, 8-Station Turret, Spindle 4500 RPM, Collet Chuck, Collets, 3-Jaw Chuck, Turret Tools, Tool Presetter & Tailstock
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €610, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Los 38: Schaublin 102 CNC Platern Lathe with Siemens Control
Schaublin 102 CNC Platern Lathe with Siemens Control. S/No. 330506
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €590, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Los 39: Chiron FZ08W Twin Pallet High Speed Vertical Machining Centre with Siemens Control
Chiron FZ08W Twin Pallet High Speed Vertical Machining Centre with Siemens Control, Pallets 550 x 300mm, 15,000 RPM Spindle, 12-Station ATC and Renishaw MP15P Probe. S/No. 204-65 (2001)
Please Note: This Item is located in Sprimont, Belgium