2257 - Equipment no longer required due to the Retirement of the Directors at Gramton Engineering Company Ltd & Others, Phase 2
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location:- These Items are located in Ashton-Under-Lyne, Lancashire and Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Clearance Dates - Due to the Christmas break the removal dates for these items will be as follows:
Up until Thursday 19th December 2013
and then from:
6th January 2014 to 16th January 2014
(There will be no clearance on site between 20th December 2013 and 5th January 2014 inclusive)
Prime d'acheteur
'La prime d''acheteur sera fixée à 15.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing by Appointment only with the Auctioneer, please contact our Office on: + 44 (0) 121 328 2424
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 71-80 de 94
Lot 68: Hare Type AM300 Bench Type Press
Hare Type AM300 Bench Type Press with 12" x 8" Table, Stroke 5", Daylight 9" Throat 4", 3 Ton.
Please Note: These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 69: Atsugi Model AP-2-MH Hydraulic Bench Press
Atsugi Model AP-2-MH Hydraulic Bench Press with 2 Ton Capacity, 27" x 10" Table, 6" Stroke, 12" Daylight (approx), 5" Throat
Please Note: These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 70: Jam type APP150S Pneumatic Bench Press
Jam type APP150S Pneumatic Bench Press with 1.5 Ton Capacity, Table 9" x 9", Daylight 9". Throat 5 1/2". Foot Control (1992)
Please Note: These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 71: Schmdt Pneumatic Bench Press
Schmdt Pneumatic Bench Press with 60KN Capacity. 10" x 8" Platen Size. 10" Daylight. 6" Throat
Please Note: These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 72: Dantherm Type AUTO MZ-50 Dust Extraction Unit
Dantherm Type AUTO MZ-50 Dust Extraction Unit with Twin Chamber Dual Door Collection System, 5.5KW Load, Approximate Outside Diameter 10' High x 8' Wide x 4' Deep (2005)
Please Note: These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 73: Ingersol Rand Type SSR ML37 Rotary Compressor
Ingersol Rand Type SSR ML37 Rotary Compressor with Working Pressure Max Bar 7.5. Main Motor 44 Kw, Size 2600 x 1200 x 1100, Weight 880kg, 38475 hours.
Please Note: These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 74: Hydrovane Compressor Type 170 pum with Motor 40 HP
Hydrovane Compressor Type 170 pum with Motor 40 HP
Please Note: These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 75: HPC Plusair Model SSM6 Mini Rotary Screw Compressor
HPC Plusair Model SSM6 Mini Rotary Screw Compressor, Safe Working Pressure 7.5 bar, Receiver Capacity 127L. 3 Phase (1991)
Please Note: These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 76: Laycock Model LX Air Compressor
Laycock Model LX Air Compressor, Capacity: 15. S.A.E: 30.
Please Note: These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 77: Air Master Model AM45EF250 Compressor
Air Master Model AM45EF250 Compressor, Max Working Pressure 150psi. S.A.E: 30. Air Receiver Capacity 250Ltr's.
Please Note: These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.