2257 - Equipment no longer required due to the Retirement of the Directors at Gramton Engineering Company Ltd & Others, Phase 2
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location:- These Items are located in Ashton-Under-Lyne, Lancashire and Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Clearance Dates - Due to the Christmas break the removal dates for these items will be as follows:
Up until Thursday 19th December 2013
and then from:
6th January 2014 to 16th January 2014
(There will be no clearance on site between 20th December 2013 and 5th January 2014 inclusive)
Prime d'acheteur
'La prime d''acheteur sera fixée à 15.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing by Appointment only with the Auctioneer, please contact our Office on: + 44 (0) 121 328 2424
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 31-40 de 94
Lot 28: Kearney & Trecker 415 S-15 No.4 Horizontal Mill
Kearney & Trecker 415 S-15 No.4 Horizontal Mill, Powered Overarm, Double Swivel Head, Spindle 50 ISO, Speeds 25 to 2000rpm, Table Size 76" x 15", Maximum Distance from Table to Spindle Nose 29"
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Lot 29: Rambaudi MS3 Heavy Duty Turret Mill
Rambaudi MS3 Heavy Duty Turret Mill, 40 ISO Vertical Spindle, 50 ISO Horizontal Spindle, 1310 x 300 mm Table Size, Vertical Spindle Speeds 40-3500 rpm, Horizontal Spindle Speeds, 25 -1500 rpm. X Axis 950mm, Cross 270mm, Vetical 400mm, Power Feeds to Table All Ways, 200mm Riser Block
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Lot 30: Gate Heavy Duty Turret Mill
Gate Heavy Duty Turret Mill, 50" x 12" Table, 33" X Traverse. 40 ISO Taper, Variable Speeds, Power to Table all ways, 2 Axis Digital Readout, Nikken Tool Set
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Lot 31: Bridgeport Series 1 Interact CNC Milling Machine
Bridgeport Series 1 Interact CNC Milling Machine, Table Size 34" x 12", Heidenhain TNC 145 Control, S/No. 18290584B
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 32: Bridgeport Series 1 Interact CNC Milling Machine
Bridgeport Series 1 Interact CNC Milling Machine, Table Size 34" x 12", Heidenhain TNC 145 Control, S/No. 14830783B
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 33: Elga Turret Milling Machine
Elga Turret Milling Machine, Table Size 43" x 10", 40 INT Taper, Speeds 70 to 2300.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 34: MAS Vertical Milling Machine
MAS Vertical Milling Machine, Table Size 52" x 12", 50 INT Taper, Speeds 40 to 1600rpm.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 35: Bridgeport Turret Milling Machine
Bridgeport Turret Milling Machine. 42" x 9" Table, Power feed in X. 1 1/2HP Variable Speed Head, R8 Spindle, Speeds 50-3000 rpm, 2 Axis Digital Readout, Coolant.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 36: Adcock & Shipley Type 2S Universal Milling Machine
Adcock & Shipley Type 2S Universal Milling Machine, Table Size 54" x 12", Speeds 30 to 1500rpm.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 37: TOS FNK 25A Turret Milling Machine
TOS FNK 25A Turret Milling Machine, Table Size: 49" x 11.1/2", Spindle 40 ISO. Speeds: 56-4500rpm.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.