2257 - Equipment no longer required due to the Retirement of the Directors at Gramton Engineering Company Ltd & Others, Phase 2
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location:- These Items are located in Ashton-Under-Lyne, Lancashire and Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Clearance Dates - Due to the Christmas break the removal dates for these items will be as follows:
Up until Thursday 19th December 2013
and then from:
6th January 2014 to 16th January 2014
(There will be no clearance on site between 20th December 2013 and 5th January 2014 inclusive)
Prime d'acheteur
'La prime d''acheteur sera fixée à 15.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing by Appointment only with the Auctioneer, please contact our Office on: + 44 (0) 121 328 2424
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 94
Lot 10: Emco Turn 140 CNC Lathe
Emco Turn 140 CNC Lathe, Emcotronic T1 Control, 340mm Swing Over Bed, 158mm Swing Over Cross Slide, 300mm X & Y Traverse, 30mm Spindle Bore, Spindle Speeds 150-2500rpm
Please Note:- This Machine is for Spares or Repairs Only, Sold as is
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lot 11: Imatec ID-175 Centre Lathe
Imatec ID-175 Centre Lathe, 14" Swing over bed, 40" Between Centres, 1 5/8" Spindle Bore, Speeds 60 to 1600 rpm, Quick Change Toolpost
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Lot 12: Stanley Gap Bed Centre Lathe
Stanley Gap Bed Centre Lathe, Swing Over Bed 21", Swing in Gap 36", Distance Between Centres 60", Speeds 13 to 800rpm, Spindle Bore 3 1/2"
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Lot 13: Colchester Triumph 2000 Gap Bed Centre Lathe
Colchester Triumph 2000 Gap Bed Centre Lathe, 15" Swing over Bed, 9 1/2" Swing over Cross slide, 23" Swing in Gap, 50" Between Centres, 2 1/8" Spindle Bore, Speeds 25-2000 rpm, Imperial leadscrew & Dials, Quick change Toolpost & Holders, 3 Jaw Chuck
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Lot 14: Dean Smith & Grace Type 13/1 Centre Lathe
Dean Smith & Grace Type 13/1 Centre Lathe, 13 1/2" Swing over bed, 42" between centres, 1 1/2" Spindle Bore, Ex. College
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Lot 15: Ward 7DS Capstan Lathe
Ward 7DS Capstan Lathe, 2 1/4" Spindle Bore with Collet Chuck, 4 Way Toolpost, Rear Toolpost, Some Turret Tooling
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Lot 16: Herbert 4 Capstan Lathe
Herbert 4 Capstan Lathe, 2" Spindle Bore, Collet Chuck
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Lot 17: Ward 2DB Scholar Capstan Lathe
Ward 2DB Scholar Capstan Lathe, Collet Chuck, Dual Dials with Tooling
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Lot 18: Herbert 2D Capstan Lathe
Herbert 2D Capstan Lathe (Square Head), 13" Swing over Bed, 7 1/2" Swing over Cross Slide, 8" Max Turning Length, 1 1/2" Spindle Bore, Speeds 50-2550 rpm
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Lot 19: Colchester Triumph 7 1/2" Gap Bed Centre Lathe
Colchester Triumph 7 1/2" Gap Bed Centre Lathe, 15" Swing Over Bed, 22" Swing in Gap, 30" Between Centres. 2" Spindle Bore, 2 & 3 Point Steadies. 3 Jaw Chuck, Quick Change Tool Post
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser