2629 - CNC & Conventional Toolroom Equipment no longer required due to the restructuring of CJ Engineering Ltd
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These Items are located in Tamworth and Burntwood. Please see individual lots for location and loading facilities.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 66
Los 1: Dahlih MCV 1450 Vertical Machining Centre
Dahlih MCV 1450 Vertical Machining Centre with Fanuc Om Control Table Size 1600 X 800mm X Travel 1450mm Y Travel 750mm Z Travel 750mm, ATC 24 Tools. S/No.3001070155 (2004)
Please Note: This Lot is Located in Tamworth unfortunately there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.
Los 2: Haas SL-20TCE CNC Lathe
Haas SL-20TCE CNC Lathe, S/No.70548 (2005)
Please Note: This Lot is Located in Tamworth unfortunately there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.
Los 3: Hardinge Conquest CS 42 CNC Lathe
Hardinge Conquest CS 42 CNC Lathe, Fanuc ot Control, Collet Chuck, Tail Stock, Parts Catcher 10 Station Turret
Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.
Los 4: Harrison Alpha 400 CNC Teach Lathe
Harrison Alpha 400 CNC Teach Lathe, 400mm X 1250mm Between Centres, Gap Bed, 3 & 4 Jaw Chucks, Fanuc Control, Quick Change Tool Post Plus Holders, 245mm Swing Over Cross Slide, 585mm Swing in Gap, 54mm Spindle Bore, S/No, A30239/082 (1996)
Please Note: This Lot is Located in Burntwood and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser
Los 5: Emco PC Turn 125 CNC Lathe
Emco PC Turn 125 CNC Lathe Fanuc 0T Control. S/No. A7V L5, 004 (1998)
Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.
Los 6: Hydrafeed Bar Feed Model HY
Hydrafeed Bar Feed Model HY. S/No. 9444
Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.
Los 7: Fanuc Robodrill CX-T10B CNC Drilling Machine
Fanuc Robodrill CX-T10B CNC Drilling Machine, Fanuc 16-M Control, Spindle: 8000 Rpm X: 500mm, Y: 380mm Z: 300mm (1995)
Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.
Los 8: Churchill PH 400 Gear Hobber
Churchill PH 400 Gear Hobber, S/No. 13744-80-10
Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.
Los 9: Nihon NDP-1 Kikai Gear Hobber
Nihon NDP-1 Kikai Gear Hobber, Hobbing Capacity, Max, Dia, (without support) = 460mm, Hobbing Capacity, Max, Dia, (with support) = 380mm, Max, Vertical Travel, Hob Saddle = 310mm, Max, Pitch Hobbing = M,P 5, Max Dia, of Hob = 115mm, Max, Length of Hob = 110mm, (1991)
Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.
Los 10: Nihon Ndp-1 Kikai Gear Hobber
Nihon Ndp-1 Kikai Gear Hobber, Hobbing Capacity, Max, Dia, (without Support) = 460mm, Hobbing Capacity, Max, Dia, (with Support) = 380mm, Max, Vertical Travel, Hob Saddle = 310mm, Max, Pitch Hobbing = M,P 5, Max Dia, of Hob = 115mm, Max, Length Of Hob = 110mm, (1987)
Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.