2590 - High Quality CNC Machining Centres & Lathes plus other Toolroom Equipment previously used by Jordan Engineering Ltd
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These lots are located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Please click here to view a Brochure for this Auction
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer on Monday 5th June 2017 from 1pm (UK Time)
Please contact our Office on: +44 (0) 121 328 2424 or email
us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 11-20 von 120
Los *: Combination of Lots 3 & 3A
Combination of Lots 3 & 3A
Lot 3 - Doosan DNM 650 Vertical Machining Centre with Fanuc Series i Control, Table Size: 1,300mm x 670mm, X = 1,250mm, Y = 650mm, Z = 610mm, Spindle Speeds: 8,000rpm, 40INT Spindle Taper, 30-Position Toolchanger, Chiller & Swarf Conveyor. S/No. DNM6500100 (10/2009)
Lot 3A - 4th Axis Unit, 320mm 3-Jaw Chuck
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLosnummer | Beschreibung |
---|---|
3 | Doosan DNM 650 Vertical Machine Centre |
3A | 4th Axis Unit with 320mm 3-Jaw Chuck |
Los 3B: Qty BT 40 Tooling
Qty BT 40 Tooling
Please Note: This lot is located in Gateshead, Newcastle Upon
Tyne. Unfortunately there are no loading facilities available on
site. Dismantling & Loading will be at the cost of the
purchaser.
Los 3C: Qty BT 40 Tooling
Qty BT 40 Tooling
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 4: Doosan DNM 650 Vertical Machine Centre
Doosan DNM 650 Vertical Machining Centre with Fanuc Series i Control, Table Size; 1,300mm x 670mm, X = 1,250mm, Y = 650mm, Z = 610mm, Spindle Speeds: 8,000rpm, 40INT Spindle Taper, 30-Position Toolchanger, 320mm 3-Jaw Chuck, Chiller & Swarf Conveyor. S/No. MV0011-000934 (10/2012)
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 4A: Qty BT40 Tooling
Qty BT40 Tooling
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 4B: Qty BT40 Tooling
Qty BT40 Tooling
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 4C: Qty BT40 Tooling
Qty BT 40 Tooling
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 4D: BT 40 Boring Head Dinox KMB6336 5 – 15mm
BT 40 Boring Head Dinox KMB6336 5 – 15mm
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 4E: Cupboard with Large Qty of Collets
Cupboard with Large Qty of Collets
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 5: Mazak E – Tower 5 Axis Multitasking Turning / Milling Machine
Mazak E – Tower 5-Axis Multitasking Turning/Milling Machine with Matrix Control, Twin Vertical Chucks: 600mm diameter, X = 1,100mm, Y = 800mm, Z = 900mm, B-Axis: 150 Degrees, C-Axis: 360 Degrees, Speeds: 12,000rpm, 80-Position Toolchanger, Jet Coolant, (1) 600mm 4-Jaw Chuck & Chiller. S/No. 190766 (02/2007)
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.