2556A - Removed Lots
Auktion beendet am
Verbleibende Zeit
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-9 von 9
Los 9: MORGAN RUSHWORTH Pinch Power Bending Rolls
MORGAN RUSHWORTH Pinch Power Bending Rolls, Type PIPR, 1250 x 6mm Initial, Roll Size 50" x 6 1/2" Diameter, Hand and Foot Control, Top Slip Roll, Emergency Kick Stop.
Please Note: This lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 9: MORGAN RUSHWORTH Pinch Power Bending Rolls
MORGAN RUSHWORTH Pinch Power Bending Rolls, Type PIPR, 1250 x 6mm Initial, Roll Size 50" x 6 1/2" Diameter, Hand and Foot Control, Top Slip Roll, Emergency Kick Stop.
Please Note: This lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 29: KEARNEY TRECKER Horizontal Milling Machine Type No. 3CE
KEARNEY TRECKER Horizontal Milling Machine Type No. 3CE with Vertical Head, Table Size 67" x 15", Spindle Taper 50ISO, Spindle Speeds 25 to 1300rpm, 7.5 Hp Motor, Feed Per Minute 1/2" to 25".
Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 29: KEARNEY TRECKER Horizontal Milling Machine Type No. 3CE
KEARNEY TRECKER Horizontal Milling Machine Type No. 3CE with Vertical Head, Table Size 67" x 15", Spindle Taper 50ISO, Spindle Speeds 25 to 1300rpm, 7.5 Hp Motor, Feed Per Minute 1/2" to 25".
Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 31: CINCINNATI Type 315-16-UNI-EDO No.3 Universal Milling Machine
CINCINNATI Type 315-16-UNI-EDO No.3 Universal Milling Machine, Table Size: 69" x 16", Spindle Taper: 50 ISO, Speeds 16 to 1,600rpm
Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 31: MYFORD Hydraulic Cylindrical Grinder Type MG12-ME
MYFORD Hydraulic Cylindrical Grinder Type MG12-ME, Capacity 12" x 5" Diameter, Wheel Diameter 12", Universal Workhead, With Diaform Form Grinding Attachment.
Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 31: MYFORD Hydraulic Cylindrical Grinder Type MG12-ME
MYFORD Hydraulic Cylindrical Grinder Type MG12-ME, Capacity 12" x 5" Diameter, Wheel Diameter 12", Universal Workhead, With Diaform Form Grinding Attachment.
Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 72: WADKIN 5 Head Tenoner Type EKA
WADKIN 5 Head Tenoner Type EKA, Test No 79263, (2) x 5HP Tenoning Heads Top & Bottom, (2) x 2HP Scribing Heads, (1) x 2HP Cut Of Saw, Ex University
Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 72: WADKIN 5 Head Tenoner Type EKA
WADKIN 5 Head Tenoner Type EKA, Test No 79263, (2) x 5HP Tenoning Heads Top & Bottom, (2) x 2HP Scribing Heads, (1) x 2HP Cut Of Saw, Ex University
Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.