2411 - Large Capacity Vertical & Horizontal Borers and other Conventional Equipment available due to the Reorganisation of a Major Valve Manufacturer due to the flooding of the site
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location:- These Items are located in Ayrshire, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.
Please Note: Some of this equipment has been subject to flash flooding. Various refurbishment has already been undertaken, however, we recommend that any potential purchaser should inspect the goods on site to acquaint themselves and make a full assessment of the overall condition and status of the equipment that they are interested in purchasing. Some of this equipment may require retrofitting. All items are sold in an ‘as is’ condition.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on + 39 0732 677 063 or email info@cottandco.it
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 11-20 von 89
Los 11: Kearns & Richards Horizontal Borer with Heidenhain Control
Kearns & Richards Horizontal Borer with Heidenhain Control, Table 1.2m x 1.2m, Chuck Size 700mm. Machine No. GLO11. S/No. 7018
Please Note: This Item is located in Ayrshire, Unfortunately
there are no loading facilities available. Dismantling and Loading
will be at the cost of the purchaser.
Please Note: Some of this equipment has been subject to flash flooding. Various refurbishment has already been undertaken, however, we recommend that any potential purchaser should inspect the goods on site to acquaint themselves and make a full assessment of the overall condition and status of the equipment that they are interested in purchasing. Some of this equipment may require retrofitting. All items are sold in an ‘as is’ condition. ...
Los 12: Kearns HBM Horizontal Borer
Kearns HBM Horizontal Borer, Table Size 84’’ x 48’’. Machine No. GLO13
Please Note: This Item is located in Ayrshire, Unfortunately
there are no loading facilities available. Dismantling and Loading
will be at the cost of the purchaser.
Please Note: Some of this equipment has been subject to flash flooding. Various refurbishment has already been undertaken, however, we recommend that any potential purchaser should inspect the goods on site to acquaint themselves and make a full assessment of the overall condition and status of the equipment that they are interested in purchasing. Some of this equipment may require retrofitting. All items are sold in an ‘as is’ condition.
Los 13: Kearns & Richards Model NC100 Horizontal Borer with Heidenhain Control
Kearns & Richards Model NC100 Horizontal Borer with
Heidenhain Control, Table Size 120mm x 120mm, Twin Table, Chuck
700mm, 1500kg Hoist. Machine No. GL001
Please Note: This Item is located in Ayrshire, Unfortunately
there are no loading facilities available. Dismantling and Loading
will be at the cost of the purchaser.
Please Note: Some of this equipment has been subject to flash flooding. Various refurbishment has already been undertaken, however, we recommend that any potential purchaser should inspect the goods on site to acquaint themselves and make a full assessment of the overall condition and status of the equipment that they are interested in purchasing. Some of this equipment may require retrofitting. All items ...
Los 14: Churchill Model HC4/15 CNC Lathe
Churchill Model HC4/15 CNC Lathe, 12’’ Chuck, 12-Station Turret. Machine No. GL021 S/No. 20162
Please Note: This Item is located in Ayrshire, Unfortunately
there are no loading facilities available. Dismantling and Loading
will be at the cost of the purchaser.
Please Note: Some of this equipment has been subject to flash flooding. Various refurbishment has already been undertaken, however, we recommend that any potential purchaser should inspect the goods on site to acquaint themselves and make a full assessment of the overall condition and status of the equipment that they are interested in purchasing. Some of this equipment may require retrofitting. All items are sold in an ‘as is’ condition.
Los 15: Colchester Triumph 2000 Lathe
Colchester Triumph 2000 Lathe, Machine No. GL020, Gap Bed, 10’’
3-Jaw Chuck, 14’’ 4-Jaw Chuck. S/No. 6-0004-16726
Please Note: This Item is located in Ayrshire, Unfortunately
there are no loading facilities available. Dismantling and Loading
will be at the cost of the purchaser.
Please Note: Some of this equipment has been subject to flash flooding. Various refurbishment has already been undertaken, however, we recommend that any potential purchaser should inspect the goods on site to acquaint themselves and make a full assessment of the overall condition and status of the equipment that they are interested in purchasing. Some of this equipment may require retrofitting. All items are sold in an ‘as is’ condition.
Los 16: Cincinnati Hydro-Tel Milling Machine
Cincinnati Hydro-Tel Milling Machine, Machine No. GL019, Table
Size 7ft x 23’’
Please Note: This Item is located in Ayrshire, Unfortunately
there are no loading facilities available. Dismantling and Loading
will be at the cost of the purchaser.
Please Note: Some of this equipment has been subject to flash flooding. Various refurbishment has already been undertaken, however, we recommend that any potential purchaser should inspect the goods on site to acquaint themselves and make a full assessment of the overall condition and status of the equipment that they are interested in purchasing. Some of this equipment may require retrofitting. All items are sold in an ‘as is’ condition.
Los 17: Crowthorn Lathe
Crowthorn Lathe, Machine No. GL018, 18’’ 4-Jaw Chuck
Please Note: This Item is located in Ayrshire, Unfortunately
there are no loading facilities available. Dismantling and Loading
will be at the cost of the purchaser.
Please Note: Some of this equipment has been subject to flash flooding. Various refurbishment has already been undertaken, however, we recommend that any potential purchaser should inspect the goods on site to acquaint themselves and make a full assessment of the overall condition and status of the equipment that they are interested in purchasing. Some of this equipment may require retrofitting. All items are sold in an ‘as is’ condition.
Los 18: Asquith 7ft Radial Drill
Asquith 7ft Radial Drill, Box Table 6ft x 5ft, Machine No. GL014. S/No. P.36370
Please Note: This Item is located in Ayrshire, Unfortunately
there are no loading facilities available. Dismantling and Loading
will be at the cost of the purchaser.
Please Note: Some of this equipment has been subject to flash flooding. Various refurbishment has already been undertaken, however, we recommend that any potential purchaser should inspect the goods on site to acquaint themselves and make a full assessment of the overall condition and status of the equipment that they are interested in purchasing. Some of this equipment may require retrofitting. All items are sold in an ‘as is’ condition.
Los 19: Omerod Slotting Machine
Omerod Slotting Machine. S/No. GL023
Please Note: This Item is located in Ayrshire, Unfortunately
there are no loading facilities available. Dismantling and Loading
will be at the cost of the purchaser.
Please Note: Some of this equipment has been subject to flash flooding. Various refurbishment has already been undertaken, however, we recommend that any potential purchaser should inspect the goods on site to acquaint themselves and make a full assessment of the overall condition and status of the equipment that they are interested in purchasing. Some of this equipment may require retrofitting. All items are sold in an ‘as is’ condition.
Los 20: Kitchen & Walker Type E-2 3ft Radial Drill
Kitchen & Walker Type E-2 3ft Radial Drill. S/No. 2866
(1979)
Please Note: This Item is located in Ayrshire, Unfortunately
there are no loading facilities available. Dismantling and Loading
will be at the cost of the purchaser.