2390 - Nearly New Hurco VMX60i CNC Machining Centre and Wenzel XO87 CMM previously used by J8 Precision Ltd
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These Items are located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing is available by appointment only with the Auctioneer,
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on +39 073 267 7063 or email
info@cottandco.it
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-2 von 2
Los 1: Hurco VMX60i Vertical Machining Centre
Hurco VMX60i Vertical Machining Centre S/No. H-H6145 (2014) with Full 4th Axis, Table Size 1676mm x 660mm, 1360kg Capacity. X Axis = 1524mm, Y Axis = 660mm, Z Axis 610mm, 250mm 3-Jaw Chuck and Face Plate, Tailstock, 24-Position ATC, 12,000 RPM Spindle, CAT40 Taper, Coolant Filtration System, Swarf Conveyor and Through Spindle Coolant, Habor HWK 250 PTSB Oil Chiller. S/No. 233387, Dual Screen Control, 3D Taster DTI Probe, (2) Hurco HVS66 150mm Machine Vices, Range of Tooling
Please Note:
The cost of this machine in November 2014 was £93,900 + VAT
This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser.
Los 2: Wenzel Xorbit 87 3 Axis Coordinate Measuring Machine with Renishaw PH10M Plus Probe
Wenzel Xorbit 87 3 Axis Coordinate Measuring Machine with Renishaw PH10M Plus Probe, S/No. 9131106 (2013) X = 800mm, Y Axis = 1500mm, Z = 700mm, Table Size 2340mm, Wenzel WPC 2040 Control, Renishaw PHC10-3 Plus Control, HP Officejet 6100 Printer, HT400 Portable Hand Box, Range of equipment
Please Note:
The cost of this machine in 2014 was £48,900 + VAT
This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser.