2386 - Conventional Machine Tools, Saws, Surface Finish Equipment Ovens, Test & Balancing Equipment formerly used in the Aerospace Industry & Others
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These Items are located in the West Midlands, Please see individual lots for loading information.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing is available by appointment only with the Auctioneer, please contact our Office on: +44 (0) 121 328 2424
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 40
Los 1: Jones & Shipman 1055 Cylindrical Grinder
Jones & Shipman 1055 Cylindrical Grinder, 60’’ between centres, 6’’ centre height, double swivel head. S/No. B0 90344
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser.
Los 2: Jones & Shipman 1310 Cylindrical Grinder
Jones & Shipman 1310 Cylindrical Grinder, 18’’ between centres, 4’’ centre height, Single Swivel Head, Internal Spindle, Steadies, 3 & 4 Jaw Chucks.
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser
Los 3: Moore No2 Jig Grinder
Moore No2 Jig Grinder with 19’’ x 10’’ Table. S/No. 7037
Please Note: This Item is located in Birmingham and will be
loaded free of charge to a suitable vehicle. Blocking &
Securing will be at the cost of the purchaser
Los 3A: Newall Jig Borer
Newall Jig Borer, Digipac 2 Axis Dro, Table Size 36’’ x 24’’, 6 Spindle Speeds, 40 – 2500 RPM, Qty of Tooling S/No. 54-JA-2436-133
Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser
Los 4: Thompson Matrix Surface Grinder
Thompson Matrix Surface Grinder with 24” x 12” Electro Magnetic Chuck & Coolant. S/No. B63364X
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Los 5: Lapmaster 24 Lapping Machine
Lapmaster 24 Lapping Machine with 24’’ Diameter Lapping Plate.
S/No. 26597
Please Note: This Item is located in Birmingham and will be
loaded free of charge to a suitable vehicle. Blocking &
Securing will be at the cost of the purchaser
Los 6: Cincinnati Milacron Vertical Milling Machine
Cincinnati Milacron Vertical Milling Machine with 65’’ x 14’’
Table. S/No. 11A23V1ABE-6
Please Note: Spindle drive and Table feed need
attention
Please Note: This Item is located in Birmingham and will be
loaded free of charge to a suitable vehicle. Blocking &
Securing will be at the cost of the purchaser
Los 6A: Bridgeport Turret Mill
Bridgeport Turret Mill, Power Cross Feed, Table Size 42’’ x 9’’, Qty of Tooling. S/No. BRU/2009B
Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser
Los 7: Sterling BM50 440 CGH Automatic Horizontal Bandsaw
Sterling BM50 440 CGH Automatic Horizontal Bandsaw with Manual
Mitre Facility, 440mm Capacity, Automatic Feed. S/No. 1210017
(2012) Supplied New (2014)
Please Note:
The Cost of this Machine in 2014 was Circa £25,000
This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser
Los 8: Thomas 315 Supercut Steel Cutting Circular Saw
Thomas 315 Supercut Steel Cutting Circular Saw, 12’’ Blade &
Vice, Material Support Arm. S/No. 12 01037 (2012)
Please Note: This Item is located in Birmingham and will be
loaded free of charge to a suitable vehicle. Blocking &
Securing will be at the cost of the purchaser