Przedmiot 6: Doosan DNM 400 4th Axis Vertical Machining Centre
Kończy się:
wtorek 27 wrz 2016 15:20 PM BST
Pozostały czas:
Aukcja zakończona
Musisz się zalogować, aby móc licytować
Podbicie: £ 250
Oferty: 71
Premia kupującego: 16%
Stawka VAT: 20%
| Make: | Doosan |
|---|
Wideo
Pełny opis działki
Doosan DNM 400 4th Axis Vertical Machining Centre with Fanuc i series Control System, Maximum Spindle speed 12,000rpm, BT40 Spindle Taper, axis travels X 764mm Y 437mm Z 512mm 4th 360 degrees, Rapid Feed rates X Y 36 M/min Z 30 M/min, 30 Station ATC, Swarf Conveyor, Fume Extraction, Nikken 4th axis 200mm diameter with Tail Stock, Renishaw Laser Tool Presetter, S/No. DNM4000063 (09/2009)
Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.
Kluczowe warunki / informacje eksportowe
Please Note: All lots are located in Huddersfield, West
Yorkshire.
Unfortunately there are no loading facilities available on
site. Dismantling & Loading will be at the cost of the
purchaser.
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.