3393U - Short Notice Sale – MUST BE SOLD - GF Agie Mikron UCP600, Sodick AQ600L EDM, Mitutoyo Crysta-Apex CMM, Tooling & Inspection Equipment previously used in the manufacture of Formula 1 and Motorsport components by Erode-All Limited
aukcji
Seitenaufrufe
Viewing will be available strictly by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
Aukcja kończy się o:
środa 2 lip 2025 at 03:00 PM BST
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 18%.
VAT
Stawka VAT wynosi 20.00%.
Ostateczna data płatności
czwartek 4 wrz 2025 at 05:00 PM BST
Ostateczna data odbioru przedmiotu
piątek 11 lip 2025 at 05:00 PM BST
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Location: These lots are located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.
https://assets.publishing.service.gov.uk/media/660d281067958c001f365abe/uk-strategic-export-control-list.pdf
Location
High Wycombe, Bucks, UK
Opłata eksportowa
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55.00 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Musisz się zalogować, aby móc licytować
Aukcja kończy się o:
środa 2 lip 2025 at 03:00 PM BST
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 18%.
VAT
Stawka VAT wynosi 20.00%.
Ostateczna data płatności
czwartek 4 wrz 2025 at 05:00 PM BST
Ostateczna data odbioru przedmiotu
piątek 11 lip 2025 at 05:00 PM BST
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmiot 11-20 / 31
Lot 56: Manual Shear, Mounted on Stand, Approx. 6" Wide Cut
Manual Shear, Mounted on Stand, Approx. 6" Wide Cut
Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April
2024)
The purchaser shall be responsible for ensuring export compliance
in accordance with OEM/UK Strategic Export Controls Legislation of
1st April 2024 for goods purchased at auction. The purchaser shall
also be responsible for all associated costs in obtaining
measurements/accuracy checks for export classification needed for
an export application. An Export License Application Fee of
£350 plus VAT shall be applicable for goods requiring an
export license application.
Lot 57: Norton 4DB Manual Fly Press
Norton 4DB Manual Fly Press
Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April
2024)
The purchaser shall be responsible for ensuring export compliance
in accordance with OEM/UK Strategic Export Controls Legislation of
1st April 2024 for goods purchased at auction. The purchaser shall
also be responsible for all associated costs in obtaining
measurements/accuracy checks for export classification needed for
an export application. An Export License Application Fee of
£350 plus VAT shall be applicable for goods requiring an
export license application.
Lot 59: Double Ended Tool Post Grinder
Double Ended Tool Post Grinder
Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April
2024)
The purchaser shall be responsible for ensuring export compliance
in accordance with OEM/UK Strategic Export Controls Legislation of
1st April 2024 for goods purchased at auction. The purchaser shall
also be responsible for all associated costs in obtaining
measurements/accuracy checks for export classification needed for
an export application. An Export License Application Fee of
£350 plus VAT shall be applicable for goods requiring an
export license application.
Lot 66: Compair L11 Air Compressor
Compair L11 Air Compressor, Max Pressure 7.5bar, Capacity 1.82 m3/min, Power 11kw, Weight 219kg. S/No. BA45762001 (2018)
Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.
Lot 67: Hydrovane HV15RS Air Compressor
Hydrovane HV15RS Air Compressor, Max Bar 10, 15kw. S/No. V15-001085-0912 (Motor Fault/Spares or Repair)
Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April
2024)
The purchaser shall be responsible for ensuring export compliance
in accordance with OEM/UK Strategic Export Controls Legislation of
1st April 2024 for goods purchased at auction. The purchaser shall
also be responsible for all associated costs in obtaining
measurements/accuracy checks for export classification needed for
an export application. An Export License Application Fee of
£350 plus VAT shall be applicable for goods requiring an
export license application.
Lot 75: Various Carbide Insert Face Mill Cutters
Various Carbide Insert Face Mill Cutters
Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April
2024)
The purchaser shall be responsible for ensuring export compliance
in accordance with OEM/UK Strategic Export Controls Legislation of
1st April 2024 for goods purchased at auction. The purchaser shall
also be responsible for all associated costs in obtaining
measurements/accuracy checks for export classification needed for
an export application. An Export License Application Fee of
£350 plus VAT shall be applicable for goods requiring an
export license application.
Lot 76: Various Carbide Insert Face Mill Cutters
Various Carbide Insert Face Mill Cutters
Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April
2024)
The purchaser shall be responsible for ensuring export compliance
in accordance with OEM/UK Strategic Export Controls Legislation of
1st April 2024 for goods purchased at auction. The purchaser shall
also be responsible for all associated costs in obtaining
measurements/accuracy checks for export classification needed for
an export application. An Export License Application Fee of
£350 plus VAT shall be applicable for goods requiring an
export license application.
Lot 88: Various HSS Jobber Drills
Various HSS Jobber Drills
Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April
2024)
The purchaser shall be responsible for ensuring export compliance
in accordance with OEM/UK Strategic Export Controls Legislation of
1st April 2024 for goods purchased at auction. The purchaser shall
also be responsible for all associated costs in obtaining
measurements/accuracy checks for export classification needed for
an export application. An Export License Application Fee of
£350 plus VAT shall be applicable for goods requiring an
export license application.
Lot 88A: Bench with 4" Record Vice and Various Hand Tools
Bench with 4" Record Vice and Various Hand Tools
Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April
2024)
The purchaser shall be responsible for ensuring export compliance
in accordance with OEM/UK Strategic Export Controls Legislation of
1st April 2024 for goods purchased at auction. The purchaser shall
also be responsible for all associated costs in obtaining
measurements/accuracy checks for export classification needed for
an export application. An Export License Application Fee of
£350 plus VAT shall be applicable for goods requiring an
export license application.
Lot 111A: Magnetic Chuck 400mm x 200mm
Magnetic Chuck 400mm x 200mm with (2) x Magnetic Blocks 190mm x 100mm, 390mm x 110mm
Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April
2024)
The purchaser shall be responsible for ensuring export compliance
in accordance with OEM/UK Strategic Export Controls Legislation of
1st April 2024 for goods purchased at auction. The purchaser shall
also be responsible for all associated costs in obtaining
measurements/accuracy checks for export classification needed for
an export application. An Export License Application Fee of
£350 plus VAT shall be applicable for goods requiring an
export license application.
** Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.