3393U - Short Notice Sale – MUST BE SOLD - GF Agie Mikron UCP600, Sodick AQ600L EDM, Mitutoyo Crysta-Apex CMM, Tooling & Inspection Equipment previously used in the manufacture of Formula 1 and Motorsport components by Erode-All Limited
aukcji
Seitenaufrufe
Viewing will be available strictly by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
Aukcja kończy się o:
środa 2 lip 2025 at 03:00 PM BST
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 18%.
VAT
Stawka VAT wynosi 20.00%.
Ostateczna data płatności
czwartek 4 wrz 2025 at 05:00 PM BST
Ostateczna data odbioru przedmiotu
piątek 11 lip 2025 at 05:00 PM BST
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Location: These lots are located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.
https://assets.publishing.service.gov.uk/media/660d281067958c001f365abe/uk-strategic-export-control-list.pdf
Location
High Wycombe, Bucks, UK
Opłata eksportowa
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55.00 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Musisz się zalogować, aby móc licytować
Aukcja kończy się o:
środa 2 lip 2025 at 03:00 PM BST
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 18%.
VAT
Stawka VAT wynosi 20.00%.
Ostateczna data płatności
czwartek 4 wrz 2025 at 05:00 PM BST
Ostateczna data odbioru przedmiotu
piątek 11 lip 2025 at 05:00 PM BST
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmiot 1-10 / 31
Lot 4: GF Agie Charmilles Mikron UCP 600 Vario 5-Axis Multi-Pallet Machining Centre (2008)
GF Agie Charmilles Mikron UCP 600 Vario 5-Axis Multi-Pallet Machining Centre with Heidenhain iTNC-530 Control. Serial No. TBC (2008), 10 Pallet Changer System, 30 Position ATC, High Pressure Through-Spindle Coolant, HSK-63 Spindle Taper, Steptec 20,000rpm Spindle, Renishaw OMP Touch Probe, Cleanmist CM800 Filtration Unit, System 3R GPS 240 Master Pallet, Through Spindle Coolant
Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.
https://assets.publishing.service.gov.uk/media/660d281067958c001f365abe/uk-strategic-export-control-list.pdf
Lot 12: Sodick AQ600L Wire EDM. (2012) with LN2W Control
Sodick AQ600L Wire EDM. Serial No. C0256 (12-2011) with LN2W Control
Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.
https://assets.publishing.service.gov.uk/media/660d281067958c001f365abe/uk-strategic-export-control-list.pdf
Lot 18: Erowa Machining Fixture Clamp Head
Erowa Machining Fixture Clamp Head
Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.
Lot 19: Erowa Machining Fixture Clamp Head
Erowa Machining Fixture Clamp Head
Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April
2024)
The purchaser shall be responsible for ensuring export compliance
in accordance with OEM/UK Strategic Export Controls Legislation of
1st April 2024 for goods purchased at auction. The purchaser shall
also be responsible for all associated costs in obtaining
measurements/accuracy checks for export classification needed for
an export application. An Export License Application Fee of
£350 plus VAT shall be applicable for goods requiring an
export license application.
Lot 20: Erowa Machining Fixture Clamp Head
Erowa Machining Fixture Clamp Head
Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April
2024)
The purchaser shall be responsible for ensuring export compliance
in accordance with OEM/UK Strategic Export Controls Legislation of
1st April 2024 for goods purchased at auction. The purchaser shall
also be responsible for all associated costs in obtaining
measurements/accuracy checks for export classification needed for
an export application. An Export License Application Fee of
£350 plus VAT shall be applicable for goods requiring an
export license application.
Lot 28: Erowa Quick Chuck 50 Combi Mount Machining Clamp Fixture (Qty 2)
Erowa Quick Chuck 50 Combi Mount Machining Clamp Fixture (Qty 2)
Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.
Lot 37: Erowa Machining Adaptor Plates
Erowa Machining Adaptor Plates
Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.
Lot 40: 50mm & 1" Slot Erowa Adaptor Plates
50mm & 1" Slot Erowa Adaptor Plates
Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April
2024)
The purchaser shall be responsible for ensuring export compliance
in accordance with OEM/UK Strategic Export Controls Legislation of
1st April 2024 for goods purchased at auction. The purchaser shall
also be responsible for all associated costs in obtaining
measurements/accuracy checks for export classification needed for
an export application. An Export License Application Fee of
£350 plus VAT shall be applicable for goods requiring an
export license application.
Lot 50: Jones & Shipman/Praga Tools 540 Surface Grinder
Jones & Shipman/Praga Tools 540 Surface Grinder, 450 x 150mm Magnetic Chuck, Power Rise & Fall Head, Dust Extraction, Coolant Tank, Imperial Dials. S/No. 2803
Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.
Lot 52: Vacublast Int Nova 76 Reach In Sand Blast Cabinet
Vacublast Int Nova 76 Reach In Sand Blast Cabinet, Trigger Nozzle Blast Gun, Side Entry Loading (L/H Side), Extractor, Spare Gloves. S/No. 300
Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April
2024)
The purchaser shall be responsible for ensuring export compliance
in accordance with OEM/UK Strategic Export Controls Legislation of
1st April 2024 for goods purchased at auction. The purchaser shall
also be responsible for all associated costs in obtaining
measurements/accuracy checks for export classification needed for
an export application. An Export License Application Fee of
£350 plus VAT shall be applicable for goods requiring an
export license application.
** Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.