3136 - CNC Lathes, Machining Centre, Wire Eroders & Inspection Equipment formerly used by Seiki Service Ltd
Engineering
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
Please Note: These lots are located in Newcastle-under-Lyme and Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 18.00%.
VAT
Stawka VAT wynosi 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmioty 1-10 z 93
Przedmiot 1: Daewoo Lynx 210 CNC Lathe
Daewoo Lynx 210 CNC Lathe with Fanuc 21i -T, Collet Chuck, Tooleye, Tailstock, 3-Jaw Hydraulic Chuck, Filtermist. S/No. L2103614 (2002)
Please Note: This lot is located in Newcastle under Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...
Przedmiot 2: Colchester Combi 2000
Colchester Combi 2000 with GE Fanuc 210i-T, 3 & 4 Jaw Collet Chuck, Diplomatic 8 Station Turret. S/No. E70044 (1998)
Please Note: This lot is located in Newcastle under Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on ...
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutaj
Przedmiot 2A: Qty of VDI 30 Tooling
Qty of VDI 30 Tooling
Please Note: This lot is located in Newcastle under Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutaj
Przedmiot 2B: Qty of VDI 30 Tooling
Qty of VDI 30 Tooling
Please Note: This lot is located in Newcastle under Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutaj
Przedmiot 2C: Qty of VDI 30 Tooling
Qty of VDI 30 Tooling
Please Note: This lot is located in Newcastle under Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutaj
Przedmiot *: Combination of lots 2, 2A, 2B & 2C
Combination of lots 2, 2A, 2B & 2C
Lot 2 - Colchester Combi 2000 with GE Fanuc 210i-T, 3/4 Collet Chuck, Diplomatic 8 Station Turret. S/No. E70044 (1998)
Lot 2A - Qty of VDI 30 Tooling
Lot 2B - Qty of VDI 30 Tooling
Lot 2C - Qty of VDI 30 Tooling
Please Note: This lot is located in Newcastle under Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs ...
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutaj| Partia # | Opis |
|---|---|
| 2 | Colchester Combi 2000 |
| 2A | Qty of VDI 30 Tooling |
| 2B | Qty of VDI 30 Tooling |
| 2C | Qty of VDI 30 Tooling |
Przedmiot 3: Cincinnati Arrow 750 VMC
Cincinnati Arrow 750 VMC with GE Fanuc Series 18i-M, Nikken 4th Axis, (6) x Geradi Vice. S/No. 7043-Foo-RR-1351 (1999)
Please Note: This lot is located in Newcastle under Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on ...
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutaj
Przedmiot 3A: Qty of CAT 40 Tooling
Qty of CAT 40 Tooling
Please Note: This lot is located in Newcastle under Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutaj
Przedmiot *: Combination of lots 3 & 3A
Combination of lots 3 & 3A
Lot 3 - Cincinnati Arrow 750 VMC with GE Fanuc Series 18i-M, Nikken 4th Axis, (6) x Geradi Vice. S/No. 7043-Foo-RR-1351 (1999)
Lot 3A - Qty of CAT 40 Tooling
Please Note: This lot is located in Newcastle under Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export ...
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutaj| Partia # | Opis |
|---|---|
| 3 | Cincinnati Arrow 750 VMC |
| 3A | Qty of CAT 40 Tooling |
Przedmiot 4: Fanuc Robodrill XT14iA Drill/Tap
Fanuc Robodrill XT14iA Drill/Tap with Fanuc 16i-M, 14 Station ATC, Nikken 5 Ax-130 FA 5 Axis Table. S/No. P001TH060 (12/1997)
Please Note: This lot is located in Newcastle under Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued ...