Leica Geosystems AT901-LR Absolute Laser Tracker with Leica AT Controller 900 and (2) x 5m Sensor Cables Mounted in an AT Extension Stand. This Unit is mounted in Shipping/Measuring Cart, Fitted with Leica T-Cam LR CMOS Digital Camera System with Visible Light and Near Infrared Leica T-Probe II Portable Measuring Device with Various Length Carbon Fibre Probes, Leica T-Scan Triangulation Laser with an Added Optical Scnner with Stand, Leica AT Meteostation Air Temp, Air Pressure and Humidity Unit, PC, Monitor, CD's, Manuals, Various Cables and Carry Cases. S/No.'s AT901-LR 3151(2008), T-CAM LR 708 (2008), T-Probe II 780 (2009), T-Scan 0707379 (2007)

Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Faro F04 Gauge Plus Portable 3D CMM Measurement Arm, In Flight Case with Arm USB Driver CD Rev 22.0. S/No. F04-02-06-21679. Note: No PSU Included

Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Faro Edge Measuring Arm, Model 14000, Bluetooth & Wifi Enables, Faro I-probe Head with Hand Trigger Grip Rev 3.5, Square Base Plate, Mounted in Soft Edge Carry Case with Plastic Fly Case. S/No. E09-05-13-28489 (2014) Note: No PSU or Cables Included

Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Mitutoyo C-3000 and CV-3100 Contracer Contour Measurement System, Mounted on Granite Bed with 280mm x 180mm Sub Table, Mitutoyo Remote Control Box and Electrical Power Supply Unit, Mitutoyo Calibration Jig and Dial Tension Gauge, Contracer Arms. S/No. 200010708 610461 (2007) Note: Granite Table (Crown) Not included

Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Cim Core 3036i Articulated Measuring Arm with Extension Arm and Damper Support, Probes with Holders, Carry Case. S/No. 3036-187. Note: No PSU or Cables Included

Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Mitutoyo CS-3000 Formtracer Surface Roughness Measurement System with Mitutoyo Remote Joy Stick Control, Mitutoyo Dongle, Various Mitutoyo Probe Fingers. S/No. 300101 Power Supply Module Possible Fault. Note Granite Table (Crown) not included

Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Mitutoyo PJ-A3000 Profile Projector. S/No. 220116

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Tesa S Scan 52 Reflex Click Optical Measuring System for Turned Parts with PC, Monitor. Country of Origin: Switzerland

Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Bowers 100 - 126mm Bore Micrometer with Check Gauge

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Moore & Wright 50 - 75 and 75 - 100mm

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.