2916 - Depocut, Mazak, Bridgeport, Haas & OKK Machining Centres and Toolroom Equipment
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Leicester. Please see individual lots for loading information and charges. All/Any tooling is being offered as specifically described.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-7 de 7
Lot 100: Depocut 2012 4 Axis Vertical Machining Centre
Depocut 2012 4 Axis Vertical Machining Centre Traverses X Y Z: 2000 x 1200 x 800mm, Table 2300 x 1600mm, Spindle Speed 18000rpm, Spindle Taper HSK63, Spindle Motor 21kW, Heidenhain TNC530 Control, 38 Station ATC, 4th Axis Rotary, Swarf Conveyor, Coolant, (2004) (3) x Boxes of Tooling as per Photos
Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.
Please Note: This lot is located in Leicester. A dismantling and loading onto suitable vehicle charge of £500 will be automatically added to your invoice should you be successful in purchasing ...
Lot 101: Mazak Nexus 510C Vertical Machining Centre
Mazak Nexus 510C Vertical Machining Centre with Mazatrol 640M Nexus Control, 4th Axis, Traverses: X Y Z: 1049 x 528 x 528mm, Table: 1300 x 550mm, Spindle Speed: 0 - 12000rpm, Spindle Taper: DIN40, Spindle Motor: 18.6kW, 30 Station ATC, Swarf Conveyor, Through Spindle Coolant, Low Volt Light (2005)
Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.
Please Note: This lot is located in Leicester. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing ...
Lot 102: Bridgeport 5AX 400 5 Axis Vertical Machining
Bridgeport 5AX 400 5 Axis Vertical Machining Centre Traverses X Y Z: 810 x 610 x 500mm, Table 350mm Diameter, C Axis (rotary) 360o, A Axis (Tilt) +30o/-120o, Spindle Speed 12000rpm, Spindle Taper BT40, Spindle Motor 13kW, Rapid Feedrates 43m/minute, Heidenhain TNC530i, 30 Station Side Arm ATC, Coolant, , Low Volt light. (2004) (Please Note: Fixture on Rotary Table not included)
Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.
Please Note: This lot is located in Leicester. A dismantling and loading onto suitable vehicle charge of £300 ...
Lot 103: OKK MCH 800II 5 Axis Horizontal Machining Centre
Okk MCH 800II 5 Axis Horizontal Machining Centre Traverse XYZ 1220 x 1020 x 920mm, 800mm x 800mmPallet,FullyI integrated Vertically Mounted Hollow Spindle Peisler Rotary Table Faceplate Diameter 530mm, Centre Height 445mm, Spindle Power 18.5Kw, Spindle Speed 20-4,500rpm, 60 Station ATC, Maximum Tool Length 500mm, Tool Diameter 120mm, Spindle Taper Din50, Through Spindle coolant, Swarf Conveyor, Fanuc 16M control.
Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, weregrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.
Please Note: This lot is located in Leicester. A dismantling and loading onto ...
Lot 104: HAAS MDC-500 Twin Pallet Vertical Machining
HAAS MDC-500 Twin Pallet Vertical Machining Centre with HAAS Control, Traverses X Y Z: 508 x 356 x 508mm, (2) x Pallets 508 x 324mm, Spindle Taper BT40, 20Hp Spindle Motor giving 10000rpm, 24 Station ATC, Coolant, Swarf Conveyor, Programmable Coolant, Low Volt Light (2006) Manuals
Please Note: This lot is located in Leicester. A dismantling and loading onto suitable vehicle charge of £300 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 105: Hare AM300 Press
Hare AM300 Press (2014)
Please Note: This lot is located in Leicester. A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 106: DoAll BW1 PG Vertical Bandsaw Blade
DoAll BW1 PG Vertical Bandsaw Blade Welding Attachment (Spare Blade in Box)
Please Note: This lot is located in Leicester. A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.