2914 - XYZ, Boxford, Miyano & Colchester Lathes, Bridgeport, Boxford & Yang Eagle Milling Machines and Toolroom Equipment
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Tamworth and Burntwood. Please see individual lots for loading information. All/Any tooling is being offered as specifically described.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 65
Lot 10: Bridgeport 600-22 Vertical Machining Centre
Bridgeport 600-22 Vertical Machining Centre with Heidenhain 370 Control, Table Size 840 x 420mm, X Axis Travel 600mm, Y Axis Travel 410mm, Z Axis Travel 520mm, 22 Station Tool Changer, Swarf Conveyor. S/No. 721409 (1998)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 11: Bridgeport 600-22 Vertical Machining Centre
Bridgeport 600-22 Vertical Machining Centre with Heidenhain 370 Control, Table Size 840 x 420mm, X Axis Travel 600mm, Y Axis Travel 410mm, Z Axis Travel 520mm, 22 Station Tool Changer. S/No. 720272 (1997)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 12: Bridgeport 600-22 Vertical Machining Centre
Bridgeport 600-22 Vertical Machining Centre with Heidenhain 370 Control, Table Size 840 x 420mm, X Axis Travel 600mm, Y Axis Travel 410mm, Z Axis Travel 520mm, 22 Station Tool Changer, Swarf Conveyor. S/No. 720695 (1997)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 13: Bridgeport VMC 560-16
Bridgeport VMC 560-16 Heidenhain 2500 Control. S/No. 35105
Please Note: This lot is located in Burntwood and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Lot 14: Adcock & Shipley 3S Universal Bed Miller
Adcock & Shipley 3S Universal Bed Miller, Table Size: 1500mm x 630mm, Double Swivel Head, Spindle Taper 50 Int, 2 Axis DRO.
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 15: Binns & Berry Trident L1000 Gap Bed Lathe
Binns & Berry Trident L1000 Gap Bed Lathe, Swing Over Bed 1000mm, Swing in Gap 1500mm, Swing Over Saddle 850mm, Distance Between Centres 1350mm, Spindle Speeds 4 – 1250rpm, 900mm 4 Jaw Chuck, 4 Way Toolpost, S/No. 61490 (1981) Manuals.
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 16: Alpa RTM 1600 Surface Grinder
Alpa RTM 1600 Surface Grinder, 1520 x 560 Magnetic Chuck, X Travel 1600mm, Y Travel 625mm, Z Travel 700mm, Power Rise & Fall Incremental Down Feed. S/No. 0378003
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 17: Mollart Omnisprint Twin Spindle Drilling Machine
Mollart Omnisprint LO2-750 Twin Spindle Drilling Machine with Fanuc Power Mate Control. S/No. A0565-0400 (2005)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 18: Mollart Omnisprint Twin Spindle Drilling Machine
Mollart Omnisprint Twin Spindle Drilling Machine with GE Fanuc Series 21iM Control. S/No. A461 1200 (2001)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 19: Approx. 90 Drills
Approx. 90 Drills
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.