2849 - CNC Lathes, Machining Centres, Grinders and Toolroom Equipment no longer required due to Retirement at Plymouth Precision Engineering & Others
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Tamworth and Burntwood. Please see individual lots for loading information.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 29
Lot 1: Matsuura H PLUS - 405 Twin Pallet Horizontal Machining Centre
Matsuura H PLUS - 405 Twin Pallet Horizontal Machining Centre with Matsuura Fanuc G-Tech 16i Control, X Travel: 600 mm, Y Travel: 600 mm, Z Travel: 600 mm, B Axis 360°, Spindle Taper 40 BT, Auto Tool Changer 31 Tools, Swarf Conveyor. S/No. 020715122 (2002)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the purchaser.
Lot 2: XYZ Mini Mill 450 Vertical Machining Centre
XYZ Mini Mill 450 Vertical Machining Centre with Fanuc Oi Control, Table Size 530 x 320 mm, X Axis Travel 450 mm, Y Axis Travel 310 mm, Z Axis Travel 380 mm, 10 Station ATC, Tooling. S/No. 10090 (2006)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the purchaser.
Lot 3: Hurco BMC 4040 Vertical Machining Centre
Hurco BMC 4040 Vertical Machining Centre with Ultimax Control, Table Size 47” x 19”, X Axis Travel 40”, Y Axis Travel 20”, Z Axis Travel 24”, ATC 24 Station. S/No. B49830092 (1998)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the purchaser.
Lot 4: Bridgeport 760/22 Vertical Machining Centre
Bridgeport 760/22 Vertical Machining Centre with Heidenhain 360 Control, Table Size 1000mm x 490mm, X Axis Travel 760mm, Y Axis 500mm, Z Axis 480mm, 22 Station ATC. S/No. 20291 (1994)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the purchaser.
Lot 5: Bridgeport 800-22 Vertical Machining Centre
Bridgeport 800-22 Vertical Machining Centre with Digital Heidenhain TNC 425 Control, Table Size 1000 x 490 mm, X Axis Travel: 800 mm, Y Axis Travel: 510 mm, Z Axis Travel: 500 mm 22 Station Tool Changer. S/No. 950108 (2000)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the purchaser.
Lot 6: Yang Eagle SMC-12 CNC Lathe
Yang Eagle SMC-12 CNC Lathe with Fanuc 0-TD Control, 3 Jaw Chuck 170mm, Swing 330mm, Z Axis Travel 230mm, X Axis Travel 230mm, Spindle Bore 45mm, 10 Station Turret, Multi-Feed Short Magazine Bar Feed Model ML1. S/No. C00607 (2000)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the purchaser.
Lot 7: Ajax Premier 310 CNC Lathe
Ajax Premier 310 CNC Lathe with Fagor Control. S/No. 35115B50947 (1996)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the purchaser.
Lot 8: Feeler FTC-30 CNC Lathe
Feeler FTC-30 CNC Lathe with Fanuc OT Control, Swing Over Bed 580mm, 3 Jaw Chuck 300mm, X Axis Travel 225mm, Z Axis Travel 670mm, Bar Capacity 78mm, 12 Station Turret, Swarf Conveyor, Tooling, Manuals. S/No. TE181 (2001)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the purchaser.
Lot 9: Emco Turn 320 CNC Lathe
Emco Turn 320 CNC Lathe with Siemens Control, 8 Station Turret, Tailstock
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the purchaser.
Lot 10: Emco Turn 325 CNC Lathe
Emco Turn 325 CNC Lathe, Fanuc 21-T Control, 8 Station Turret, Tailstock, Manuals (1999)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the purchaser.