2836 - Hapa Flexo Printers, Packaging Equipment and Warco BH900 Lathe surplus to the ongoing requirements of Advanced Medical Solutions
Printing
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These lots are located in Cheshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-5 von 5
Los 1: Hapa Type H-237-T-2C-LC Two Colour Flexo Press
Hapa Type H-237-T-2C-LC Two Colour Flexo Press, Max Web Width 360mm, Max Print Width 350mm, Min Web Width 122mm, Max Speed 18m per min. S/No. 22295 (2009)
Please Note: These lots are located in Cheshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 2: Hapa Type H-237-T-2C-LC Two Colour Flexo Press
Hapa Type H-237-T-2C-LC Two Colour Flexo Press, Max Web Width 360mm, Max Print Width 350mm, Min Web Width 122mm, Max Speed 18m per min. S/No. 22296 (2009)
Please Note: These lots are located in Cheshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 4: Doyen Medipharm 4SS Packing Machine
Doyen Medipharm 4SS Packing Machine, Sealing Speed 3-8 m\min, Sealing Material Capability Paper \ Poly \ Foil, Sealing Set Up, Twin Side Seal Single Cross Seal, Sealing Type Standard & Skip Seal, Maximum Web Width 300mm, Infeed Twin Chain Peg Pusher 3” Pitch, Infeed Max. Dressing Width 250mm, Printing Configured for Top & Bottom Web Printing (Domino V3 NOT INCLUDED), Peripherals Top & Bottom Web Registration & Splice Detection, Configuration Datum Edge - Right to Left, Machine, Dimensions L x W x H (M) Infeed – 3.5 x 0.8 x 0.95, 4SS & Web Module 3.5 x 1.5 x 2.0 (1.7), Electrical Cabinet 1.2 x 0.7 x 2.0, Mains Voltage 415 VAC, Motor Drives 2 x Stepper Motors (Spares or Repairs) (1998)
Please Note: These lots are located ...
Los 5: Novexx ALS206 Dual Labelling System
Novexx ALS206 Dual Labelling System. S/No. 0013440712-ALS206
Please Note: These lots are located in Cheshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 6: Warco BH900 Engineering Workshop Lathe
Warco BH900 Engineering Workshop Lathe, Distance between Centres 900mm, Swing over 300mm, Speeds 50-1200rpm, Full Length Imperial/Metric Screw Cutting, Metric/Imperial Hand Dials, 2hp Motor, 240v Single phase. S/No. 1415 (2006)
Please Note: These lots are located in Cheshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.