2823 - Hurco Vertical Machining Centres, Sodick & Agie EDM'S, Toolroom Equipment and Ancillaries no longer required due to Investment in New Equipment by The Goodfish Group, Cannock
aukcji
Hurco VMX 30 Vertical Machining Centre, Hurco VSX24 Vertical Machining Centre, Sodick AQ325L Wire Eroders, Agie Mondo Star 20 Die Sinking Machine, XYZ 1500 Turret Mill, Jones & Shipman 1400 Surface Grinder, plus many others...
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
Aukcja kończy się o:
środa 16 paź 2019 at 03:00 PM BST
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 16.00%.
VAT
Stawka VAT wynosi 20.00%.
Ostateczna data płatności
piątek 18 paź 2019 at 05:00 PM BST
Ostateczna data odbioru przedmiotu
czwartek 31 paź 2019 at 05:00 PM GMT
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Location: These lots are located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 107A however is located in Birmingham.
Musisz się zalogować, aby móc licytować
Aukcja kończy się o:
środa 16 paź 2019 at 03:00 PM BST
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 16.00%.
VAT
Stawka VAT wynosi 20.00%.
Ostateczna data płatności
piątek 18 paź 2019 at 05:00 PM BST
Ostateczna data odbioru przedmiotu
czwartek 31 paź 2019 at 05:00 PM GMT
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmiot 11-20 / 81
Lot 106: Agie Mondo Star 20 Die Sinking Machine
Agie Mondo Star 20 Die Sinking Machine with Agie Futura V Control, 3R Tooling, 300mm x 400mm Table Size, 350mm x 150mm Magnetic Chuck. S/No. M20 STAR – 003391
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 107: Agie Mondo Star 20 Die Sinking Machine
Agie Mondo Star 20 Die Sinking Machine with Agie Futura V Control, 3R Tooling, 300mm x 400mm Table Size, 350mm x 150mm Magnetic Chuck. S/No. M20 STAR – 003390
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 107A: Sodick AP3 Model FS-SAP3 Spark Eroder
Sodick AP3 Model FS-SAP3 Spark Eroder with Fine Sodick Mark X EDM Control, Table Size: 600mm x 300mm, Tank Size: 700mm x 500mm x 320mm depth, Homemade Plate: 400mm x 250mm, 3R System. S/No. SAP3 207 (1991)
Please Note: This Machine is not in working order, sold as is for spares and repairs
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 108: Sodick KLC Small Hole Drilling EDM
Sodick KLC Small Hole Drilling EDM with Table Size 350mm x 250mm, X ACT SD52 DRO. Plant No. 0142
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 109: XYZ 1500 Turret Mill
XYZ 1500 Turret Mill with Newall DRO 42’’ x 9’’ Table, 6’’ Machine Vice, Power Cross Feed. S/No. 9919. (2003)
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 110: Jones & Shipman 1400 Surface Grinder
Jones & Shipman 1400 Surface Grinder with Opti Dress and Extraction Mag Chuck 2ft x 8’’. S/No. BO 17369
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 111: Kitchen & Walker 4ft Radial Drill
Kitchen & Walker 4ft Radial Drill with Swinging Box Table 2ft x 20’’ x 22’’. S/No. TAB1200/602
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 112: Alexander 2CG Tool Cutter Grinder
Alexander 2CG Tool Cutter Grinder with Collets. S/No. 2938N
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 113: Model UE-250A Horizontal Band Saw
Model UE-250A Horizontal Band Saw 10’’ with Blade 27mm x 0.9mm x 3300mm. S/No. 03053903 (2003)
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 114: 3 Ton A-Frame Mobile Crane
3 Ton A-Frame Mobile Crane with Electric Hoist, 2.9m x 1.5m x 3.7m. Plant No. 0306
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
** Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.