2823 - Hurco Vertical Machining Centres, Sodick & Agie EDM'S, Toolroom Equipment and Ancillaries no longer required due to Investment in New Equipment by The Goodfish Group, Cannock
Engineering
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
Location: These lots are located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 107A however is located in Birmingham.
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 16.00%.
VAT
Stawka VAT wynosi 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmioty 11-20 z 81
Przedmiot 106: Agie Mondo Star 20 Die Sinking Machine
Agie Mondo Star 20 Die Sinking Machine with Agie Futura V Control, 3R Tooling, 300mm x 400mm Table Size, 350mm x 150mm Magnetic Chuck. S/No. M20 STAR – 003391
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmiot 107: Agie Mondo Star 20 Die Sinking Machine
Agie Mondo Star 20 Die Sinking Machine with Agie Futura V Control, 3R Tooling, 300mm x 400mm Table Size, 350mm x 150mm Magnetic Chuck. S/No. M20 STAR – 003390
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmiot 107A: Sodick AP3 Model FS-SAP3 Spark Eroder
Sodick AP3 Model FS-SAP3 Spark Eroder with Fine Sodick Mark X EDM Control, Table Size: 600mm x 300mm, Tank Size: 700mm x 500mm x 320mm depth, Homemade Plate: 400mm x 250mm, 3R System. S/No. SAP3 207 (1991)
Please Note: This Machine is not in working order, sold as is for spares and repairs
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmiot 108: Sodick KLC Small Hole Drilling EDM
Sodick KLC Small Hole Drilling EDM with Table Size 350mm x 250mm, X ACT SD52 DRO. Plant No. 0142
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmiot 109: XYZ 1500 Turret Mill
XYZ 1500 Turret Mill with Newall DRO 42’’ x 9’’ Table, 6’’ Machine Vice, Power Cross Feed. S/No. 9919. (2003)
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmiot 110: Jones & Shipman 1400 Surface Grinder
Jones & Shipman 1400 Surface Grinder with Opti Dress and Extraction Mag Chuck 2ft x 8’’. S/No. BO 17369
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmiot 111: Kitchen & Walker 4ft Radial Drill
Kitchen & Walker 4ft Radial Drill with Swinging Box Table 2ft x 20’’ x 22’’. S/No. TAB1200/602
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmiot 112: Alexander 2CG Tool Cutter Grinder
Alexander 2CG Tool Cutter Grinder with Collets. S/No. 2938N
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmiot 113: Model UE-250A Horizontal Band Saw
Model UE-250A Horizontal Band Saw 10’’ with Blade 27mm x 0.9mm x 3300mm. S/No. 03053903 (2003)
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmiot 114: 3 Ton A-Frame Mobile Crane
3 Ton A-Frame Mobile Crane with Electric Hoist, 2.9m x 1.5m x 3.7m. Plant No. 0306
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.