2777 - Mazak HCN 6800 & Matsuura H Plus 630 Horizontal Machining Centres, Matsuura Cublex 25 previously used by Time Rainham Ltd & Others
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location:
Lots 200, 201, 202 are located in Rainham, Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 203 is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange an appointment.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-4 de 4
Lot 200: Mazak HCN 6800 II 4-Axis Horizontal Machining Centre
Mazak HCN 6800 II 4-Axis Horizontal Machining Centre with Mazatrol Matrix Nexus Control, 630mm Pallet Size, 80 ATC, Approx. 1500kg Pallet Load Capacity, Through Spindle Coolant, B Axis 1 degree on Rotary Table, Conveyor, 630mm x 630mm Pallet Size, 1050mm (X Axis), 900mm (Y Axis), 980mm (Z Axis) Travel, 10,000rpm Max Spindle Speed, CAT NO. 50 Tool Shank. Approx. Machine Weight 19,000kg. S/No. 196522 (2007) with Swarf Bin
Please Note: Backend Tooling is included with this
machine, any consumable tooling shown in the photographs is not
included
Please Note: This lot is located in Rainham, Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. ...
Lot 201: Matsuura H Plus 630 4-Axis Horizontal Machining Centre
Matsuura H Plus 630 4-Axis Horizontal Machining Centre with Matsuura G Tech Control, 60 ATC, 630mm Pallet Size, Through Spindle Coolant, Full B Axis .001 degrees on Rotary Table, Conveyor, 1050mm (X Axis) Table Longitudinal Travel, 920mm (Y Axis) Headstock Vertical Travel, 870mm (Z Axis) Column Traverse Travel, 75 - 995mm Table Top to Spindle Centre, 150 - 1020mm Table Centre to Spindle Gauge Line, 1,200kg Pallet (Table) Loading Capacity, 45 - 12,000min Spindle Speed, Approx. 21,000kg Machine Weight, Approx. 3503mm Machine Height. S/No. 15826 (2004) with Swarf Bin.
Please Note: Backend Tooling is included with this machine, any consumable tooling shown in the photographs is not included
Please Note: This lot is located ...
Lot 202: Matsuura Maxia H Plus 630 4-Axis Horizontal Machining Centre
Matsuura Maxia H Plus 630 4-Axis Horizontal Machining Centre with Matsuura G-Tech 30i Control, 630mm Pallet Size, 60 ATC, Through Spindle Coolant, Full B Axis .001 degrees on Rotary Table, Conveyor, 1050mm (X Axis) Travel, 920mm (Y Axis) Travel, 870mm (Z Axis) Travel, 75 - 995mm Table Top to Spindle Centre, 150 - 1020mm Table Centre to Spindle Gauge Line, 1,200kg Pallet (Table) Loading Capacity, Diameter 1,050mm x Height 1,000mm Max work size, 45 - 12,000min Spindle Speed. S/No. 17424 (2007) with Swarf Bin
Please Note: Backend Tooling is included with this machine, any consumable tooling shown in the photographs is not included
Please Note: This lot is located in Rainham, Essex. Unfortunately, there are no loading ...
Lot 203: Matsuura Cublex 25 5 Axis Twin Pallet Turning/Milling Machine
Matsuura Cublex 25 5 Axis Vertical Twin Pallet Turning/Milling Machining Centre with G-Tech 840 Di Control, Maximum Spindle Speed 15000rpm, HSK 63 Spindle Taper, Axis Travels X=550mm Y=410mm Z=450mm B=220 Degrees (-110/+110) C 360 Degrees, Maximum Table Speed for Turning 3000rpm, Rapid Feedrates 50m/Min 150 Station ATC, FSE Filtration System, 40 Bar Through Spindle Coolant, Filtermist FX4000 Fume Extraction, Pallet Diameter 130mm, Maximum Component Size D=250mm H=250mm, Renishaw Probe Interface, Tool Presetter, Swarf Conveyor, Approximately 12 Additional Pallets. S/No. 17777 (7/2008)
Please Note: This lot is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be ...