2772 - CNC Machining Centres, Lathes, Conventional and Toolroom Machinery no longer required by Midland Hydraulics and Others

Mikron XSM800 CNC Vertical Machining Centre with Heidenhain 530i Control, 36,000rpm Step-tec Spindle, 30 ATC, Swarf Management, Fume Extractor, Chiller, X-Axis Stroke approx. 800mm. S/No. 107.76.00.018 (2009) 

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.

Agie Charmilles CUT 30 Submerged 5 Axis CNC Wire EDM with Auto Wire Thread, X, Y, Z 600 x 300 x 350mm, Maximum Workpiece dimensions, 25° Taper cut, AgieCharmilles Windows Based Control, AgieCharmilles Generator, Submerged Cutting to 350mm, Auto Wire Thread, Wire capacity 0.15 - 0.30mm, Hand Box Control, Four Side Clamping Frame.

Please Note: this lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £150 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.

HAAS VF-2 Vertical Machining Centre Traverses X Y Z: 762 x 406 x 508, Table 914 x 356, Spindle Speed 0 - 7500rpm, Spindle Taper BT40, Spindle Motor 20Hp HAAS Control, 20 Station ATC, Programmable Coolant Nozzle, Low Volt light (2004)

Please Note: there is no tooling or vice with the machine.

Please Note: This lot is located in Leicester.  Dismantling and loading onto suitable vehicle charge of £200 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.

Cincinnati FADAL Model 4020HT VMC Vertical Machining Centre (2006) Traverses XYZ: 1016 x 508 x 508mm, Table 1218 x 508mm, 10000rpm, 21 Station Toolchanger, BT40, Fanuc 18i-M control, coolant, low volt light. S/No. 012006018583

Please Note: This lot is located in Leicester. A dismantling and loading onto suitable vehicle charge of £200 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.

Cincinnati Milacron Dart 500 Vertical Machining Centre with Cincinnati Acramatic A2100 Control, Table Size 700mm x 510mm, 20-Station Tool Changer, BT40 Tooling. S/No. 7053 A0A-RM-0065 (1997) with 6-Tool Holders, Excluding Vices.

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Hardinge VM 1000II Vertical Machining Centre with Sinumerik Control, Table Size:1120mm x 510mm, 20-ATC. S/No. NVCA2D0028 (2002)

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.

Hurco VM1 Vertical Machining Centre with Hurco Max Control, Table Size: 760 x 355mm, 16-Station ATC. S/No. VM1 - 061 09053AE (05/2003) MFG No. H-V10242

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £200 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.

Hurco VM1 Vertical Machining Centre with Hurco Max Control, Table Size: 760x 355mm, 16-Station ATC. S/No. VM1-06108053AE (05/2003) MFG No. H-V10241

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £200 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.

HAAS TM1 CNC Toolroom Mill with HAAS Control (2005)

Location: This lot is located in Co. Durham and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Traub TNS 30/42D Lathe with Stamag DN42 Bar Feed, System TX-8-D Control. S/No. 880 (1989)

Please Note: This lot is located in Skelmersdale. Unfortunately there is no loading available but the machine will be dismantled and skated to door for loading.