2727 - SMF, Mag Plastic & AOKI Blow Moulding Machines & Ancillary Equipment previously used in the Manufacturing of Detergent & Soap Bottles by Pizzolotto Detersivi dal 1919 srl, Belluno, Italy, Phase 2
Miscellaneous
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
Please Note: These lots are located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 18.00%.
VAT
Stawka VAT wynosi 22.00 %.
Seitenaufrufe
Viewing is available by appointment only with the Auctioneer. Please contact our UK Office on: +44 (0) 121 328 2424 or our Italian Office on + 39 0732 677 063 or email info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences.
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmioty 11-20 z 36
Przedmiot *: Combination of lots 8 & 8A
Combination of lots 8 & 8A
AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine. S/No. 9350090 (1993) with Control Panel, Dehumidifying Dryer and Hopper Loader, 4 Cavities, used to Produce 1 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
and
Moulds for AOKI Machine
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3630
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
8 | AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine |
8A | Moulds for AOKI Machine |
Przedmiot 16: Spare Clamp suitable for TECHNE 15000S Blow Moulding Machines
Spare Clamp suitable for TECHNE 15000S Blow Moulding Machines
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €30
Przedmiot 17: AUTOMA FLUS PACK 850/2V Blow Moulding Machine
AUTOMA FLUS PACK 850/2V Blow Moulding Machine
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €430
Przedmiot 18: MAGIC MG-L2ND Blow Moulding Machine
MAGIC MG-L2ND Blow Moulding Machine. S/No. 3-85 (1985)
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €430
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 18A: Various Tooling for AUTOMA and MAGIC MAX 3
Various Tooling for AUTOMA and MAGIC MAX 3
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €50
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *: Combination of lots 18 & 18A
Combination of lots 18 & 18A
MAGIC MG-L2ND Blow Moulding Machine. S/No. 3-85 (1985)
and
Various Tooling for AUTOMA and MAGIC MAX 3
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €480
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
18 | MAGIC MG-L2ND Blow Moulding Machine |
18A | Various Tooling for AUTOMA and MAGIC MAX 3 |
Przedmiot 27: (3) Galvanised Containers
(3) Galvanised Containers dim. 110 X 110 X 160
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €30
Przedmiot 65: 6 Section Bottle Storage and Delivery System
6 Section Bottle Storage and Delivery System with Vibrator and Control Panel
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site. Dismantling and Loading will be at the cost of the purchaser.
Przedmiot 66: 7 Section Bottle Storage and Delivery System
7 Section Bottle Storage and Delivery System with Vibrator and Control Panel
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site. Dismantling and Loading will be at the cost of the purchaser.
Przedmiot 67: 7 Section Bottle Storage and Delivery System
7 Section Bottle Storage and Delivery System with Conveyors and Control Panel
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site. Dismantling and Loading will be at the cost of the purchaser.