Hilmor (Anglia) DB32, 32 mm OD Mild Steel Mandrel Tube Bender, Wall thickness 2 mm, right hand bending. Max C.L.R with largest tube 241 mm, max bend angle 190 deg. Eccentric pin grip operation, manual toggle on pressure slide, hydraulic mandrel retraction. Length over mandrel 1200 mm. One former only. S/No 0268.3.99 (1999)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Sahinler PK30F, 40 x 40 x 5mm Angles Section Bending Machine, Manual adj top roll, two rolls driven. Flats on flat 80 x 15mm, flats on edge 50 x 10mm, box sect 50 x 30 x 3mm, tubes 1.1/2" x 2.9mm.dia, Double foot pedal, horizontal/vertical working position. Additional rolls required for vangles/tubes. S/No. 191415 (2005)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Keetona 100” x 1/8” (2540 x 3 mm), Hydroform universal bending and folding machine. Pro rata capacity 1016 x 6 mm. Full length segmented tooling. S/No HUF818713 (1978)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Keetona 100" x 1/8" ( 2540 x 3mm) Hydroform Universal Folding Machine, 1016 x 6mm pro-rata cap.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Carter (Chinese) 3000 x 2mm Hand Operated Box & Pan Folding Machine, full length segmented tooling, counterbalance weights (2012)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Edwards Style 2480 x 2mm Hand Operated Box & Pan Folder

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

GEKA Model 110A/180 Hydraulic Universal Steelworker. Cap 152 x 152 x 13mm angles @ 90 deg, punch 40mm x 20mm / 28mm x 28mm, shear flats 600 x 15mm / 400mm x 20mm, Crop rounds and sqares 50mm, notch 90 x 52 x 13mm, electronic length stop. Double foot pedal

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Kingsland 115XS, 115 Ton, Hydraulic Universal Steelworker, Capacities 150 x 150 x 18 mm angles, punching 34 x 26 mm, 55 x 16 mm, flat shear 380 x 25 mm, 600 x 15 mm, 55 mm rounds/squares, notching 100 x 60 x 13 mm. Electronic length stop, double foot pedal operation. S/No 679894 (1994)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Kingsland 70XS, 70 Ton, Hydraulic Universal Steelworker, 150 x 150 x 13 mm angles at 90 degrees, punching 26 x 20 mm, 55 x 10 mm, flat shear 300 x 20 mm, 415 x 15 mm, 45 mm rounds/squares, notching 90 x 45 x 10 mm. Double pedal operation, length stop (1996)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Kingsland 70XS, 70 Ton, Hydraulic Universal Steelworker, 150 X 150 X 13 mm angles at 90 degrees, punching 26 x 20 mm, 55 x 10 mm, flat shear 300 x 20 mm, 375 x 15 mm, 45 mm rounds/squares, notching 90 x 45 x 10 mm. Double foot pedal control, manual length stop. S/No 191889 (1989)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser