Lot 1: Excel Heat Furnace
'Retour à l''enchère''Description de l''élément'
Excel Heat Furnace with upgraded control system comprises programmable load temperature, air temperature, ICU, Thyristors, 9500 Kg Furnace capacity, Furnace operating temperatures 850 degrees C, Normal operating temperatures 600 – 675 degrees C, Furnace rating 300 Kw, Electrical supply 415 V 3 phase 50 Hz, Control equipment 110 V single phase, Inert gas supply, Furnace usable dimensions, Width 2000 mm Length 2000 mm Height 4300 mm, Cover weight 3000 Kg. Furnace ref no. 20659 original (1999), Upgraded new digital controller and panel in 2013. Furnace and associated equipment calibrated every 3 months.
The furnace installation is controlled with electrically
heated elements and has inert gas atmosphere function operation
when required. The furnace design has the type of control ideally
suited to large mass components in addition to smaller products.
The installation comprises of an electrically heated lift off cover
furnace. This is approx. split horizontally into two halves, the
top or cover and base. plus the necessary control equipment. The
cover has a lifting shackle to enable the shop crane to raise the
cover from the base and transport it to the park position. An
access ladder is provided on the cover to enable the operator to
connect the crane to the covers lifting shackle.The circulation fan
is roof mounted just below the roof lining with the shaft and motor
assembly outside on the roof. Cooling fans are also positioned
outside the cover on the roof. The inert atmosphere purge valve is
outside the furnace cover on the roof.
Please click here for Excel Heat Manual
Please Note: A detailed operating & comprehensive technical specification manual is available upon request
Please Note: This lot is located in Dunfermline, Scotland. Unfortunately, there are no loading facilities available on-site. Dismantling and Loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Exporter les informations
L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.
Autres informations
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.