3074 - Dahlih, Mazak & Matsuura Machining Centres, Gildemeister, XYZ & Colchester Lathes and Other Toolroom Machinery No Longer Required

Engineering

Asta conclusa il

mercoledì 19 gen 2022 at 03:00PM (GMT)

Tempo residuo

Fine asta

Descrizione asta

Please Note: These lots are located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Premio dell'acquirente

Il premio dell'acquirente verrà addebitato a 18%.

IVA

IVA applicata pari al 20%.

Date ispezioni

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

L'acquirente è responsabile a proprie spese per lo scollegamento, smontaggio e rimozione degli articoli acquistati dal luogo dell'asta. Se l'acquirente intende esportare articoli acquistati all'asta, sarà responsabile a proprie spese a garantire e rispettare tutte le condizioni di esportazione del Regno Unito e l'ottenimento di eventuali licenze di esportazione.

Spunta la casella qui sotto e clicca su conferma


* Nota Bene: - Qualsiasi traduzione uttilizzando ''Google Translate'' non è garantita come una traduzione accurata ed è solo a scopo di guida. La descrizione principale del lotto è in inglese ed e data a migliore conoscenza del banditore. Tuttavia, la precisione non è garantita e deve essere verificata dall'acquirente prima di fare offerte.

Avviso ai compratori

Termine ultimo pagamento

21 gen 2022 at 17:00 (GMT)

Termine ultimo ritiro

3 feb 2022 at 17:00 (GMT)

Spedizionieri

Squadre per il carico

Dettagli Esportazione/importazione dal UK

Lotti 1-10 di 30

La chiusura dell'asta relativa ad un lotto verrà posticipata se vengono effettuate offerte nei 10 minuti precedenti la sua chiusura.
Preview image
Chiusura:
19 gen 2022 16:50:00 GMT
Tempo residuo:
Tempo scaduto
Rilancio:
£500
Offerte:
23
Premio dell'acquirente:
18%
IVA:
20%

Lotto 1: Dahlih MVC 720 Vertical Machining Centre

Dahlih MVC 720 Vertical Machining Centre with Fanuc OI-MD Control, Table size: 950mm x 560mm, Longitudinal Traverse: X Axis - 720mm, Cross Traverse: Y Axis = 460mm, Vertical Traverse: Z Axis = 510mm, Speeds: Up to 8000rpm, Feed Rate: Variable, Spindle Taper: BT40, Automatic Tool Changer, Number of Tools: 30 (2012). Country of Origin: Taiwan

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your ...

Preview image
Chiusura:
19 gen 2022 15:40:00 GMT
Tempo residuo:
Tempo scaduto
Rilancio:
£250
Offerte:
14
Premio dell'acquirente:
18%
IVA:
20%

Lotto 2: Gildemeister CTX 400 S2 Lathe

Gildemeister CTX 400 S2 Lathe, Swing-Ø Over Bed Rail, Cover 570mm, Swing-Ø Over Plan Guide Cover 420mm, X-Axis 220mm, Z-Axis 635mm, Spindle Head Ø 170mm H5, Spindle Head Ø in Front Bearing 120mm, Spindle Bore 79mm, Chuck Ø 200 / 250mm, Speed Range 25 – 5.000rpm, Rapid Traverse X = 20m/min, Rapid Traverse Z = 24m/min, Universal Disc Turret Autom, Switching with Directional Logic (2000), Number of Tool Stations: 12. Country of Origin: Germany

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing ...

Preview image
Chiusura:
19 gen 2022 16:10:00 GMT
Tempo residuo:
Tempo scaduto
Rilancio:
£500
Offerte:
41
Premio dell'acquirente:
18%
IVA:
20%

Lotto 3: Mazak Nexus 510C Vertical Machining Centre

Mazak Nexus 510C Vertical Machining Centre with Mazatrol 640M CNC Control, Axis X: 1049.0mm, Axis Y: 528.0mm, Axis Z: 528.0mm, Rotary Table (4th Axis), Table Length: 1300.0mm, Table width: 550.0mm, Number of Tool Pockets: 30.0, Spindle Taper: CAT 40, Max. Spindle Speed: 12000rpm (2005). Country of Origin: Japan

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods ...

Preview image
Chiusura:
19 gen 2022 16:30:00 GMT
Tempo residuo:
Tempo scaduto
Rilancio:
£250
Offerte:
22
Premio dell'acquirente:
18%
IVA:
20%

Lotto 4: XYZ Proturn VL 355 Lathe

XYZ Proturn VL 355 Lathe, 355mm Swing Over Bed, 225mm Swing Over Cross Slide, 1250mm Between Centres, 52mm Spindle Bore, 40-2200rpm Spindle Speeds, Proto Trak VL Control, 3 Jaw Chuck, Quick Change, Toolpost and Holders, Coolant, Machine Light, Interlocked Chuck Guard. Country of Origin: United Kingdom

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the ...

Preview image
Chiusura:
19 gen 2022 16:10:00 GMT
Tempo residuo:
Tempo scaduto
Rilancio:
£100
Offerte:
16
Premio dell'acquirente:
18%
IVA:
20%

Lotto 5: Matsuura RA 11 F Twin Pallet Vertical Machining Centre

Matsuura RA 11 F Twin Pallet Vertical Machining Centre, Speed: 8,000rpm (approx.), Spindle Centre to Column: 17.32", Travels: X-Axis: 23.6", Y-Axis: 16.14", Z-Axis: 18.5", Pallet / Table Dimensions: 23.5" x 15", Automatic Tool Changer, BT40 Spindle Taper, 30-Station Automatic Tool Changer, Coolant System, Centralised Lubrication System, RS-232 Port (1994). Country of Origin: Japan

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus ...

Preview image
Chiusura:
19 gen 2022 16:10:00 GMT
Tempo residuo:
Tempo scaduto
Rilancio:
£100
Offerte:
18
Premio dell'acquirente:
18%
IVA:
20%

Lotto 6: Colchester Electronic Mastiff Lathe

Colchester Electronic Mastiff Lathe with Fanuc 20-Ta Control, Swing on the Bed 554mm, Between Centres 2000mm, Centre Height 280mm, Swing Over Cross Slide 370mm, Cross Slide Stroke 290mm, Spindle Bore 90mm, Spindle Speed Low Range 16 – 204rpm, Spindle Speed Mid-range 48 – 612rpm, Spindle High Range 140 – 180rpm, Spindle Nose Camlock D1 – 11, Tailstock 6. Country of Origin: United Kingdom

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of ...

Preview image
Chiusura:
19 gen 2022 16:40:00 GMT
Tempo residuo:
Tempo scaduto
Rilancio:
£250
Offerte:
25
Premio dell'acquirente:
18%
IVA:
20%

Lotto 7: Matsuura RA-1X Twin Pallet Vertical Machining Centre

Matsuura RA-1X Twin Pallet Vertical Machining Centre with Yasnac J300 CNC Control, X = 548.6mm, Y = 408.9mm, Z = 459.7mm, Power = 5.6 kW, 15000rpm, ATC - 30, Table - 599.4mm x 378.5mm, Taper - BT40 (2001). Country of Origin: Japan

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process ...

Preview image
Chiusura:
19 gen 2022 16:50:00 GMT
Tempo residuo:
Tempo scaduto
Rilancio:
£500
Offerte:
22
Premio dell'acquirente:
18%
IVA:
20%

Lotto 8: Dahlih DL-MOV 1020BA Machining Centre

Dahlih DL-MOV 1020BA Machining Centre with Heidenhain i530 Control, Table size: 1250mm x 660mm, Table Load: 1000kg, X = 1020mm Y = 550mm Z = 560mm, Speeds 1 - 8000rpm, Variable Rapid Feed - 20,000mm/min, Feed rate - 0.04 - 393mm/min, Spindle Taper BT40, Automatic Tools 24, Spindle Motor 10 kW, Coolant and Twin Swarf Screws (2006). Country of Origin: Taiwan

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically ...

Preview image
Chiusura:
19 gen 2022 16:50:00 GMT
Tempo residuo:
Tempo scaduto
Rilancio:
£100
Offerte:
25
Premio dell'acquirente:
18%
IVA:
20%

Lotto 9: Asquith Power Thrust 4PT 14-54 Radial Drilling Machines

Asquith Power Thrust 4PT 14-54 Radial Drilling Machines, Spindle Speeds: 9.5 to 1560 (18), Spindle Taper: No 5 Morse, Spindle, Travel: 410mm, Feeds: 0.066 to 0.963, Max Spindle to Base: 70", Column Diameter: 14", Graduations: Metric, Power Locking Equipment, Safety Brake, Box Table, Coolant. Country of Origin: United Kingdom

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare ...

Preview image
Chiusura:
19 gen 2022 16:50:00 GMT
Tempo residuo:
Tempo scaduto
Rilancio:
£50
Offerte:
19
Premio dell'acquirente:
18%
IVA:
20%

Lotto 10: Kearns Richards S Type Horizontal Borer

Kearns Richards S Type Horizontal Borer, Main Table: 560 x 405mm, Top Table: 455 x 455mm, Long Traverse: 610mm, Cross Traverse: 320mm, Vertical Traverse: 285mm, Spindle Speeds: 50 – 2000rpm Infinately Variable, Spindle Taper: 40 Int, Feeds: 4- 106mm per min, Electrics: 415v, 3ph, 50 Cycles, Motor: 3HP, Tailstock / Outer Steady, Coolant. Country of Origin: United Kingdom

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will ...

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Categorie