2823 - Hurco Vertical Machining Centres, Sodick & Agie EDM'S, Toolroom Equipment and Ancillaries no longer required due to Investment in New Equipment by The Goodfish Group, Cannock

Engineering

L'asta si chiuderà il

mercoledì 16 ott 2019 at 04:00PM (BST)
Aggiungi in calendario

Tempo residuo

Tempo scaduto

Descrizione asta

Location: These lots are located in Cannock.  Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Lot 107A however is located in Birmingham.

Buyer's premium

Buyer's Premium will be charged at 16%.

IVA

IVA applicata pari al 20%.

Date ispezioni

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Spunta la casella qui sotto e clicca su conferma


* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.

Avviso ai compratori

Termine ultimo pagamento

18 ott 2019 at 18:00 (BST)

Termine ultimo ritiro

31 ott 2019 at 17:00 (GMT)

Spedizionieri

Squadre per il carico

Lotti 1-10 di 81

La chiusura dell'asta relativa ad un lotto verrà posticipata se vengono effettuate offerte nei 10 minuti precedenti la sua chiusura.
Preview image
Chiusura:
30 ott 2019 15:00:00 GMT
Tempo residuo:
Tempo scaduto
Rilancio:
£250
Offerte:
4
Buyer's premium:
16%
IVA:
20%

Lotto 100: Hurco VMX 30 Vertical Machining Centre

Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Attenzione, questo lotto è disponibile anche come combinazione.

*: Combination of Lots 100 & 100A

Preview image
Chiusura:
30 ott 2019 15:00:00 GMT
Tempo residuo:
Tempo scaduto
Rilancio:
£25
Offerte:
2
Buyer's premium:
16%
IVA:
20%

Lotto 100A: Qty of CAT40 Tool Holders

Qty of CAT40 Tool Holders and Collets and Bench

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Attenzione, questo lotto è disponibile anche come combinazione.

*: Combination of Lots 100 & 100A

Preview image
Chiusura:
30 ott 2019 15:00:00 GMT
Tempo residuo:
Tempo scaduto
Rilancio:
£250
Offerte:
15
Buyer's premium:
16%
IVA:
20%

Lotto *: Combination of Lots 100 & 100A

Combination of Lots 100 & 100A

Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)

and

Qty of CAT40 Tool Holders, Collets and Bench

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Lotti compresi in questa combinazione

Lotto # Descrizione
Preview image
Chiusura:
30 ott 2019 15:00:00 GMT
Tempo residuo:
Tempo scaduto
Rilancio:
£250
Offerte:
9
Buyer's premium:
16%
IVA:
20%

Lotto 101: Hurco VSX24 Vertical Machining Centre

Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Attenzione, questo lotto è disponibile anche come combinazione.

*: Combination of Lots 101 & 101A

Preview image
Chiusura:
30 ott 2019 15:00:00 GMT
Tempo residuo:
Tempo scaduto
Rilancio:
£25
Offerte:
2
Buyer's premium:
16%
IVA:
20%

Lotto 101A: Qty of CAT40 Tool Holders and Collets

Qty of CAT40 Tool Holders and Collets

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Attenzione, questo lotto è disponibile anche come combinazione.

*: Combination of Lots 101 & 101A

Preview image
Chiusura:
30 ott 2019 15:00:00 GMT
Tempo residuo:
Tempo scaduto
Rilancio:
£250
Offerte:
12
Buyer's premium:
16%
IVA:
20%

Lotto *: Combination of Lots 101 & 101A

Combination of Lots 101 & 101A

Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)

and

Qty of CAT40 Tool Holders and Collets

Please Note: These lots are located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Lotti compresi in questa combinazione

Lotto # Descrizione
Preview image
Chiusura:
16 ott 2019 16:30:00 BST
Tempo residuo:
Tempo scaduto
Rilancio:
£500
Offerte:
30
Buyer's premium:
16%
IVA:
20%

Lotto 102: Sodick AQ325L Wire Eroder

Sodick AQ325L Wire Eroder with Sodick Control, Work Area 600mm x 450mm. S/No. 1625

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Chiusura:
16 ott 2019 16:30:00 BST
Tempo residuo:
Tempo scaduto
Rilancio:
£500
Offerte:
30
Buyer's premium:
16%
IVA:
20%

Lotto 103: Sodick AQ325L Wire Eroder

Sodick AQ325L Wire Eroder with Sodick Control, Work Area 600mm x 450mm. S/No. 0167

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Chiusura:
16 ott 2019 16:50:00 BST
Tempo residuo:
Tempo scaduto
Rilancio:
£500
Offerte:
20
Buyer's premium:
16%
IVA:
20%

Lotto 104: Sodick AQ325L Wire Eroder

Sodick AQ325L Wire Eroder with Sodick Control, Work Area 600mm x 450mm. S/No. 0168

Please Note: For Spares and Repairs

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Chiusura:
16 ott 2019 17:00:00 BST
Tempo residuo:
Tempo scaduto
Rilancio:
£500
Offerte:
24
Buyer's premium:
16%
IVA:
20%

Lotto 105: Sodick AM3L Die Sink

Sodick AM3L Die Sink with Sodick LN1 Control, 4 Automatic Tool Changer, 3R Tooling, Table Size 600mm x 400mm. S/No. 0070 (2002)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking

Categorie