2777 - Mazak HCN 6800 & Matsuura H Plus 630 Horizontal Machining Centres, Matsuura Cublex 25 previously used by Time Rainham Ltd & Others
Engineering
Asta conclusa il
Tempo residuo
Descrizione asta
Location:
Lots 200, 201, 202 are located in Rainham, Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 203 is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Premio dell'acquirente
Il premio dell'acquirente verrà addebitato a 16.00%.
IVA
IVA applicata pari al 20.00%.
Date ispezioni
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange an appointment.
* Nota Bene: - Qualsiasi traduzione uttilizzando ''Google Translate'' non è garantita come una traduzione accurata ed è solo a scopo di guida. La descrizione principale del lotto è in inglese ed e data a migliore conoscenza del banditore. Tuttavia, la precisione non è garantita e deve essere verificata dall'acquirente prima di fare offerte.
Avviso ai compratori
Termine ultimo pagamento
Termine ultimo ritiro
Spedizionieri
Squadre per il carico
Dettagli Esportazione/importazione dal UK
Lotti 1-4 di 4
Lotto 200: Mazak HCN 6800 II 4-Axis Horizontal Machining Centre
Mazak HCN 6800 II 4-Axis Horizontal Machining Centre with Mazatrol Matrix Nexus Control, 630mm Pallet Size, 80 ATC, Approx. 1500kg Pallet Load Capacity, Through Spindle Coolant, B Axis 1 degree on Rotary Table, Conveyor, 630mm x 630mm Pallet Size, 1050mm (X Axis), 900mm (Y Axis), 980mm (Z Axis) Travel, 10,000rpm Max Spindle Speed, CAT NO. 50 Tool Shank. Approx. Machine Weight 19,000kg. S/No. 196522 (2007) with Swarf Bin
Please Note: Backend Tooling is included with this
machine, any consumable tooling shown in the photographs is not
included
Please Note: This lot is located in Rainham, Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. ...
Lotto 201: Matsuura H Plus 630 4-Axis Horizontal Machining Centre
Matsuura H Plus 630 4-Axis Horizontal Machining Centre with Matsuura G Tech Control, 60 ATC, 630mm Pallet Size, Through Spindle Coolant, Full B Axis .001 degrees on Rotary Table, Conveyor, 1050mm (X Axis) Table Longitudinal Travel, 920mm (Y Axis) Headstock Vertical Travel, 870mm (Z Axis) Column Traverse Travel, 75 - 995mm Table Top to Spindle Centre, 150 - 1020mm Table Centre to Spindle Gauge Line, 1,200kg Pallet (Table) Loading Capacity, 45 - 12,000min Spindle Speed, Approx. 21,000kg Machine Weight, Approx. 3503mm Machine Height. S/No. 15826 (2004) with Swarf Bin.
Please Note: Backend Tooling is included with this machine, any consumable tooling shown in the photographs is not included
Please Note: This lot is located ...
Lotto 202: Matsuura Maxia H Plus 630 4-Axis Horizontal Machining Centre
Matsuura Maxia H Plus 630 4-Axis Horizontal Machining Centre with Matsuura G-Tech 30i Control, 630mm Pallet Size, 60 ATC, Through Spindle Coolant, Full B Axis .001 degrees on Rotary Table, Conveyor, 1050mm (X Axis) Travel, 920mm (Y Axis) Travel, 870mm (Z Axis) Travel, 75 - 995mm Table Top to Spindle Centre, 150 - 1020mm Table Centre to Spindle Gauge Line, 1,200kg Pallet (Table) Loading Capacity, Diameter 1,050mm x Height 1,000mm Max work size, 45 - 12,000min Spindle Speed. S/No. 17424 (2007) with Swarf Bin
Please Note: Backend Tooling is included with this machine, any consumable tooling shown in the photographs is not included
Please Note: This lot is located in Rainham, Essex. Unfortunately, there are no loading ...
Lotto 203: Matsuura Cublex 25 5 Axis Twin Pallet Turning/Milling Machine
Matsuura Cublex 25 5 Axis Vertical Twin Pallet Turning/Milling Machining Centre with G-Tech 840 Di Control, Maximum Spindle Speed 15000rpm, HSK 63 Spindle Taper, Axis Travels X=550mm Y=410mm Z=450mm B=220 Degrees (-110/+110) C 360 Degrees, Maximum Table Speed for Turning 3000rpm, Rapid Feedrates 50m/Min 150 Station ATC, FSE Filtration System, 40 Bar Through Spindle Coolant, Filtermist FX4000 Fume Extraction, Pallet Diameter 130mm, Maximum Component Size D=250mm H=250mm, Renishaw Probe Interface, Tool Presetter, Swarf Conveyor, Approximately 12 Additional Pallets. S/No. 17777 (7/2008)
Please Note: This lot is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be ...